company tower banner
Professional Coatings Company Logo

ProCoat® Titan™ Polycarbonate Waterborne Finish Gloss

1 of 8 products in this brand
ProCoat® Titan™ Polycarbonate Waterborne Finish Gloss is a non-yellowing, high performance urethane technology that offers true high impact and scratch resistance. The fact that Titan™ dries in only 2 to 3 hours and is virtually odorless allows for multiple coats in a single day, and since it dries clear, your floors will retail their original color but with added beauty and protection for years to come. Titan’s two-component formula delivers the durability and performance expected for heavy-traffic commercial, residential and sports floors.

Product Type: 2K (2 component) Coating, Waterborne Coating

Features: Excellent Drying Properties, Excellent Flow Properties, Excellent Leveling Properties, Excellent Substrate Adhesion, Good Non-Yellowing Properties, Good Scratch Resistance, High Durability, High Gloss, High Impact Resistance, High Performance, Odorless

Compatible Substrates & Surfaces: Wood

Application Method: Roller

Safety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Wear Rating (1 - 10)
9 (Commercial Grade)
Product Features
  • Easy Application.
  • Fast Dry Time.
  • Excellent Adhesion Properties.
  • Excellent Flow & Leveling.
  • 2-Component Durability.
  • Environmentally Friendly.
  • V.O.C. Compliant.

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Clean Up
Water
Application Method
T-Bar, Roller, Trim Pad, Brush, Spray
Product Uses
  • Ideal for wood flooring and cork.
  • Formulated for use on newly sanded domestic & exotic woods.
  • Highly recommended for residential, commercial & sport applications.
Recommended Systems

Wood:

  • Newly sanded floors: 1 coat ProCoat Splashdown Wood Sealer with 2 - 3 coats of Titan™. When coating over stains allow stain to dry per manufacturer’s directions or longer depending on atmospheric conditions. A test area is recommended to insure compatibility with stain.
  • Recoating existing surfaces: Abrade with appropriate screen or conditioning pad and apply 1 coat of Splashdown and 1 coat of Titan™. When recoating existing surfaces compatibility must be determined by applicator.
Application Procedures
  • Wood: Shake coating vigorously for 30 - 45 seconds and then let sit 10 to 15 minutes before applying. Pour a 6" to 8" wide line of finish along the starting wall. Follow the grain of the wood. Draw a clean, pre-dampened applicator forward. Following the grain of the wood, move the finish toward the opposite wall. Hold the applicator at a snowplow angle to maintain a wet edge at all times. (Maintain at least 3" wide wet edge at all times to ensure proper coverage rate.) To prevent lapping and dry marks make sure you’re using recommended coverage of 450 - 500 square foot per gallon. Do not spread too thin. When cutting in floor, never work more than five feet ahead of the person applying the finish. For smoothest results before applying final coat, buff with conditioning pad. Always vacuum and tack thoroughly with a slightly water dampened mop or cloth after abrading.
  • Roller Application: The use of 10 mm or 3/8th microfiber rollers are suggested. Applicator should evaluate the application and use the appropriate roller material and size determined by the porosity of the substrate being coated.

Properties

Odor
Mild, Non-Offensive
Sheen
Gloss
Typical Properties
ValueUnitsTest Method / Conditions
Solids Content32.34 - 33.66%-
Volatile Organic Compoundsmax. 200g/l-
Weight/Gallon8.6lbs/gal-
Coefficient of Friction (SCOF)0.8--
Hardness130.0-Konig
Taber Abrasion (CS17, 1000g, 1000c)37.0mg loss-
Flash Point200.0°F-
Dry Time (Between Coats)2 - 4hours-
Coverage450 - 600sq.ft./gal-

Storage & Handling

Shelf Life
1 Year, Un-opened Container