Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Properties
- Quick curing
- Zero shrinkage and almost odorless
- Completely solvent-free
- Color-fast (aliphatic) and UV proof
- Excellent preservation of color and gloss
- Completely water resistant
- For out- and indoor applications
- Very low dirt absorption
- Good chemical resistance
- Up to 3 times more wear and scratch resistant than traditional flooring systems
- Resistant against plasticizers
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Thermal
Load Dry heat Dry Heat Permanent 80ºC Brief (a maximum of 7 days) 100ºC Brief (a maximum of 132 hours) 120ºC
Short-term wet heat up to a maximum of +80 ºC and only occasionally, for instance when steam-cleaning. Simultaneous chemical and mechanical loads are not permitted.
- Application Information
Method:
- Roller and brush.
- Airmix, 5% dilute with ProFast TH-S, 120 - 130 bar, nozzle 12” 40° and 60°.
- Airless, 5% dilute with ProFast TH-S, 160 - 170 bar, nozzle 12” 40° and 60°.
- Low pressure, needle 1.8.
Usage:
- 0.10 - 0.20 kg/m²/layer
- Surface, processing method and desired color dependent.
Processing Temperature:
- Object -10 and +30 ºC
- Product +10 and +25 ºC
Walkable:
- At -10 ºC: After 2,5 hours
- At 0 ºC: After 2 hours
- At 10 ºC: After 1,5 hours
- At 20 ºC: After 1 hour
- At 25 ºC: After 45 minutes
Dilution:
- Preferably none, otherwise ProFast TH-S.
- A maximum of 5% only to be added once base(A) and hardener(B) have been mixed.
- Adding thinner can affect the curing times
- Chemical resistant*: After 3 x 24 hours
- Mechanical resistant*: After 2 - 3 hours
- Water resistant*: After 2 - 3 hours
- Cleaning agent Roca Cleaner R5518 (equipment)
- * At 20 ºC and 65% RH surface.
- ** At 1 kg and 20 ºC product.
- Mixing Instruction
- 2-component products must always be mechanically mixed, preferably with a continuously adjustable mixing machine/drill (300 - 400 RPM) or another suitable mixer/whisk.
- As a guideline, the diameter of the mixer/whisk must be at least 1/3 of the diameter of the container in which the product is mixed in.
- First mix component A until it is a homogenous mixture.
- Add component B (completely drained or scraped) to component A and mix at least 2-3 minutes until it is a homogenous mixture.
- To exclude unmixed materials (bottom/sides) are processed, transfer the mixture to a clean mixing bucket/tub and mix again.
- When using additives such as quartz sand or the like, only add when the mixture is a homogenous mixture.
- After adding, please mix thoroughly again.
- When mixing parts, both components must be mixed separately and carefully and weighed accurately.
- Notes During Application
- 2-component products may only be applied when the relative humidity is less than 85%.
- The minimum surface temperature is +5°C and the temperature of the surface to be treated and the uncured product must be 3°C above the dew point.
- See the dew point table. The curing process occurs more quickly at higher temperatures and slower at lower temperatures.
- The potlife is partly dependent on the product temperature.
- Ensure good ventilation during curing. Insufficient ventilation, notably on the floors of swimming pools and other basins, bottoms of trailers, may result in slow and irregular curing of the applied primer layer.
- Entrapped solvent can lead to blistering and debonding of a subsequent layer.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (Mixed Product) | 1.41 | kg/l | - |
| Finish | Gloss | - | - |
| Mix Ratio | 1900-02-01 | g/g | - |
| Recoat Time (-10ºC) | 2.5 - 48 | hours | - |
| Recoat Time (0ºC) | 2 - 48 | hours | - |
| Recoat Time (10ºC) | 1.5 - 48 | hours | - |
| Recoat Time (20ºC) | 1 - 24 | hours | - |
| Recoat Time (25ºC) | 0.75 - 48 | minutes | - |
| Solids by Volume | 93.0 | % | - |
| VOC Quality | 73.0 | g/L | - |
| Walkable After (-10ºC) | 2.5 | hours | - |
| Walkable After (0ºC) | 2.0 | hours | - |
| Walkable After (10ºC) | 1.5 | hours | - |
| Walkable After (20ºC) | 1.0 | hours | - |
| Walkable After (25ºC) | 45.0 | minutes | - |
Packaging & Availability
- Article Number and Packaging
- 16220-5: 5 kg set
- 16220-10: 10 kg set
Storage & Handling
- Shelf Life
At least 6 months after the date of production, if stored cool in unopened packaging and protected against frost.
- Pot Life
- At 15 ºC: approx. 35 minutes
- At 20 ºC: approx. 30 minutes
- At 25 ºC: approx. 25 minutes