Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Specially designed for adhesion and/or sealing of EPDM, roof, façade, floor and pond structures.
- Sealing of connecting joints in the construction industry.
- Adhesion of building materials, such as plastics, mineral/coarse & rough surfaces, metals, alloys, treated and untreated wood, concrete and coating, lacquer and paint systems.
- Repair adhesive for old MS-Polymer connecting joints and adhesion of materials to one another.
- Properties
- Adheres perfectly to EPDM and most surfaces, even moist & damp surfaces without a primer
- Very durable with retained high elongation properties
- Wet-on-wet application
- Non-shrink and blister-free
- Almost odorless curing MS-Polymer system
- Good resistance to UV, weather, water, moisture and aging
- Non-corrosive to metals
- Free of isocyanate, solvents and silicone
- Paintable with water-based and synthetic paint systems
- Versatile applications as adhesive and/or sealant, for internal and external use
- Excellent absorption of acoustic and mechanical vibrations
- No edge contamination or staining on natural stone
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Cleaning Agent
Roca Cleaner R5518 (equipment)
- Notes During Application
- Application temperature (ambience and surface) between +5°C and +40°C.
- Apply on stable, compatible, dry, uncontaminated, greasefree and dust-free surface.
- Ensure correct joint dimensions are achieved and fill with MonoSealant for maximum movement performance.
- Use a suitable brush to remove any loose particles from the surface.
- Properly degrease greasy surface.
- MonoSealant has a broad adhesion spectrum, but highly porous surfaces and non-porous surfaces with minimal bonding should be treated with a suitable primer.
- Surface and Circumstances
Moisture Content Surface:
- Cement-bound : < 4% CM (parts by weights)
- Plaster-bound : < 0.5% CM (parts by weights)
- Paintability
It is excellently paintable with emulsion paints. However, synthetic paints may dry slowly.
- Limitations & Recommendations
- Not suitable for continuous water loads or dilation or glazing joints.
- Not suitable for applications in direct contact with natural stone, foodstuffs or the silver coating on mirrors.
- Not suitable for PE, PP, PC, PMMA, PTFE, soft plastic and neoprene.
- The adhesion on bitumen is limited to breakage in the surface. Not fungicidal.
- Ensure adequate humidity in the immediate environment.
- We recommend testing adhesion and material compatibility in advance.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Base | MS Polymer | — | — |
| Density | 1.48 | kg/l | — |
| Elongation | 300.0 | % | DIN 53504 |
| Modulus (100%) | 0.3 | MPa | — |
| Permissible Deformation | 25.0 | °C | — |
| Shore Hardness | 18.0 | A | DIN 53505 |
| Shrinkage | None | — | — |
| Skin Formation Time (23°C, 55%RH) | 15.0 | minutes | — |
| Temperature Resistant (Once Fully Cured) | -40 to 90 | °C | — |
| Tensile Strength | 0.75 | MPa | — |
| Viscosity | max. 2 | mm | ISO 7390 |
Safety & Health
- Health & Safety
- Avoid long-term contact with skin.
- If uncured material gets in your eyes, rinse out thoroughly with plenty of water and consult a physician.
- The product safety data sheet is available on request.
Packaging & Availability
- Article Number and Packaging
14030-290: 290 ml cartridge
Storage & Handling
- Shelf Life
At least 12 months after the date of production, if stored dry in unopened packaging.
- Storage Temperature
+15 to +25°C.