Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
Permanently elastic at and resistant to high and low temperatures. Also able to absorb temperature shocks.
- Properties
- Stays elastic at both high and low temperatures
- Able to absort temperature shocks
- Resistant to high and low temperatures
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application Information
- Spraying pressure: Depending on the type of pistol and mixing chamber.
- Fusion CS gun 130 – 140 - 160 bar
- Fusion AP gun 150 – 180 - 200 bar
- Usage:
- 1.12 kg/m²/mm From 1 mm.
- The applied layer thickness determines the final properties and must be adjusted to the purpose.
- Read the relevant application sheets.
- There are different conditions or pools and basins.
- Surface temperature Min. +5 ºC
- Open time*:
- With the same product: Almost directly and max. within 24 hours
- Tanks/basins: max. within 12 hours Solvent free: min. 24 and max. 36 hours
- Solvent-containing: min. 3 and max. 36 hours.
- Open times can decrease as the temperature rises.
- When exceeding the open time, the existing layer must be sanded and provided with a suitable primer.
- Chemical resistant*:
- After 3 x 24 hours Each Prokol product has varying levels of resistance to specific chemicals.
- Chemical concentrations are complex and are strongly influenced by the environment and temperature.
- Contact Prokol technical support for specific recommendations.
- Mechanical resistant*:
- After 2 x 24 hours
- Cleaning agent: Roca Cleaner N6500-P (equipment)
- Rinsing agent: Roca Cleaner TC-N
- Spraying pressure: Depending on the type of pistol and mixing chamber.
- Mixing Instruction
- 2-component products must always be mechanically mixed, preferably with a continuously adjustable mixing machine/drill (300 - 400 RPM) or another suitable mixer/whisk.
- As a guideline, the diameter of the mixer/whisk must be at least 1/3 of the diameter of the container in which the product is mixed in.
- First mix component A until it is a homogenous mixture.
- Add component B (completely drained or scraped) to component A and mix at least 2-3 minutes until it is a homogenous mixture.
- To exclude unmixed materials (bottom/sides) are processed, transfer the mixture to a clean mixing bucket/tub and mix again.
- When using additives such as quartz sand or the like, only add when the mixture is a homogenous mixture.
- After adding, please mix thoroughly again.
- When mixing parts, both components must be mixed separately and carefully and weighed accurately.
- Notes During Application
- 2-component products may only be applied when the relative humidity is less than 85%.
- The minimum surface temperature is +5°C and the temperature of the surface to be treated and the uncured product must be 3°C above the dew point.
- See the dew point table. The curing process occurs more quickly at higher temperatures and slower at lower temperatures.
- The potlife is partly dependent on the product temperature.
- Ensure good ventilation during curing. Insufficient ventilation, notably on the floors of swimming pools and other basins, bottoms of trailers, may result in slow and irregular curing of the applied primer layer.
- Entrapped solvent can lead to blistering and debonding of a subsequent layer.
- Surface and Circumstances
Moisture Content Surface:
- Cement-bound : < 4% CM (parts by weights)
- Plaster-bound : < 0.5% CM (parts by weights)
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (Mixed Product) | 1.12 | kg/l | — |
| Elongation | -1900 to +1900 | % | DIN 53504 |
| Flash Point | min. 100 | °C | — |
| Hose Temperature | 78 - 82 | °C | — |
| Mix Ratio By Volume | 1:1 | — | — |
| Modulus (100%) | 8.1 | MPa | — |
| Modulus (200%) | 10.6 | MPa | — |
| Modulus (50%) | 6.7 | MPa | — |
| MU Value | 1000.0 | — | — |
| Reaction Time | 12 - 15 | seconds | — |
| Shore Hardness | 82 - 92 | A | DIN 53505, ASTM D2240 |
| Solids by Volume | 100.0 | % | — |
| Spraying Temperature (Base) | 85.0 | °C | — |
| Spraying Temperature (Harder) | 85.0 | °C | — |
| Tack Free | 30 - 120 | seconds | — |
| Tensile Strength | -13.6 to 13.6 | MPa | DIN 53504 |
| Glass Transition Temperature | 130.0 | °C | — |
Regulatory & Compliance
- Available Certificates
- Fire classification EN 13501-5 BRoof (t1) – Warrington Fire
- Fire classification EN 13501-5 BRoof (t2) – TUV
- Fire classification on polyurethane foam based on EN 13501-5 BRoof (t2) – TUV
- Fire classification on no burning materials e.g. steel, tiles, concrete etc. based on EN 13501-5 BRoof (t2) – TUV
- Fire classification EN 13501-5 BRoof (t4) – Warrington Fire
- BDA Agrément UK
Packaging & Availability
- Article Number and Packaging
- 19260-20: 40 kg set
- 19260-200: 452 kg set
Storage & Handling
- Shelf Life
At least 12 months after the date of production, if stored between 15 - 20 °C in unopened packaging.