ACTAN

Pugh & Co. International Brand

Products:3

ACTAN®GS is a water borne-VOC free- one component adhesion primer for non-ferrous metals. It is an active resin system at quasi neutral pH that binds with the zinc surface without the disadvantages of gas formation, bubbling or cracking caused by the reaction of zinc or residual impurities at acid and alkaline pHs.

View All ACTAN Products

ACTAN® GS NH (non-hiding)

Product Families:Additives, Catalysts & Initiators

ACTAN® GS NH (non-hiding) is a water borne-VOC free- one component adhesion primer for non-ferrous metals. It is an active resin system at quasi neutral pH that binds with the zinc surface without the disadvantages of gas formation, bubbling or cracking caused by the reaction of zinc or residual impurities at acid and alkaline pHs.

ACTAN® GS400 (Grey)

Ready-to-Use Product Type:1K (1 component) Coating, Waterborne Coating, Primer
Compatible Substrates & Surfaces:Galvanized Steel, Copper, Aluminum, Metal, Steel
Features:Good Adhesion, Flexible, High Impact Resistance
Application Method:Spray, Brush

ACTAN® GS400 (Gray) is a water borne-VOC free- one component adhesion primer for non-ferrous metals. It is an active resin system at quasi neutral pH that binds with the zinc surface without the disadvantages of gas formation, bubbling or cracking caused by the reaction of zinc or residual impurities at acid and alkaline pHs.

ACTAN® DU20

Functions:Curing Agent
Chemical Family:Amines
End Uses:Waterborne Coating, Epoxy Coating, 2K (2 component) Coating, Primer
Compatible Polymers & Resins:Epoxies (EP)
Features:Excellent Adhesion, High Reactivity

ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimize wet adhesion of two-component water-borne epoxy primers on non-ferrous substrates such as galvanized steel, alu-minium and its alloys. ACTAN®DU20 with its specific amine func-tionality provides excellent wet and dry ad-hesion at a cross-linking degree of 100%on metallic substrates and maintains the nec-essary water barrier to ensure long term protection with solid and liquid epoxy res-ins.

Knowde Brand Summary

Identification

Carrier: Water
Chemical Family: Amines
Product Type: 1K (1 component) Coating,
Primer,
Waterborne Coating
Technologies: CASE Ingredients,
Ready-to-Use Products
Product Families: Additives
Catalysts & Initiators,
Functional Additives
Paints & Coatings
Primers & Sealers
CASE Ingredients Functions: Catalyst,
Curing Agent

Features & Benefits

Labeling Claims: Low VOC

Applications & Uses

Markets: Paints & Coatings,
Printing & Packaging
Applications: Other Paints & Coatings Applications
Packaging Coatings
Primers & Lacquers
Packaging Coatings
Primers & Lacquers
Application Method: Brush,
Spray
Compatible Polymers & Resins: Epoxies (EP)
Compatible Substrates & Surfaces: Aluminum,
Copper,
Galvanized Steel,
Metal,
Steel
Coating Type: 2K (2 component) Coating,
Epoxy Coating,
Primer,
Waterborne Coating

Knowde Brand Highlights

Benefits: Adhesion primer for application on hot-dip galvanised steel, aluminium, copper, bronze, stainless steel.

Perfect bond with the surface.

Forms a hard film, flexible, impact resistant, non-porous.

Film thickness not critical.

No mechanical or chemical profiling necessary on newly galvanised steel.

Ultra low VOC < 0.1g/litre.
Uses: Remove dirt, grease, oil, ensure the surface is clean and dry. Remove white rust by abrading the surface and wash-off salts with fresh water.

Apply by brush without dilution.

Air spray: nozzle orifice (mm) 1.3-1.5

Nozzle pressure (bar) 3-4.

Typical DFT: 25 micron. Coverage: 15-18 sq. m/l.

Application conditions outdoor/indoor: Temperature: 5°C – 35°C Humidity < 80 %

Touch-dry: 15 minutes

Dry to handle: 30 minutes.

Dry to recoat 24 hours 4 hours 3 hours 2 hours At ambient t° C 5-10 10-15 15-20 20-35

Overcoating: all types of solvent based paints Note: alkyd paints are not recommended for protecting zinc surfaces