company tower banner

Products

QAPCO

12 Products found on QAPCO in Polyolefins

SDSWith SDS

TDSWith TDS

Lotrène® FD 0270 banner

Lotrène® FD 0270

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Melt Flow Index:2.4 - 2.4 g/10 min

Lotrène® FD 0270 is an additive free grade mainly recommended for the extrusion of thin film for light and medium duty applications.

Lotrène® FD 0474 banner

Lotrène® FD 0474

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Additives Included:Antioxidant, Slip Agent, Anti-Blocking Agent
Melt Flow Index:4.0 - 4.0 g/10 min

Lotrène® FD 0474 is mainly recommended for the extrusion of very high clarity blown and cast films. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

Lotrène® LA 0710 banner

Lotrène® LA 0710

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion Coating, Extrusion
Melt Flow Index:8.0 - 8.0 g/10 min

Lotrène® LA 0710 is mainly recommended for the extrusion coating at high speed. It contains no additive.

Lotrène® FD 0274 banner

Lotrène® FD 0274

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Additives Included:Anti-Blocking Agent, Antioxidant, Slip Agent
Melt Flow Index:2.4 - 2.4 g/10 min

Lotrène® FD 0274 is mainly recommended for the extrusion of thin film for light and medium duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

Lotrène® FE 8004 banner

Lotrène® FE 8004

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Additives Included:Slip Agent
Melt Flow Index:0.8 - 0.8 g/10 min

Lotrène® FE 8004 is produced by a high pressure tubular process and is mainly recommended for light and medium duty film applications with good optical properties. It contains slip agent (target: 300 ppm erucamide).

Lotrène® FE 3000 banner

Lotrène® FE 3000

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Melt Flow Index:0.3 - 0.3 g/10 min

Lotrène® FE 3000 is an additive free grade produced by a tubular high pressure process mainly recommended for heavy duty film applications,.

Lotrène® FB 5026 banner

Lotrène® FB 5026

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Additives Included:Slip Agent
Melt Flow Index:0.6 - 0.6 g/10 min

Lotrène® FB 5026 is a grade produced by autoclave high pressure process and is mainly recommended for medium duty film applications with good optical properties. It contains slip agent (target: 300 ppm erucamide).

Lotrène® FD 0374 banner

Lotrène® FD 0374

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Additives Included:Slip Agent, Anti-Blocking Agent
Melt Flow Index:3.5 - 3.5 g/10 min

Lotrène® FD 0374 is mainly recommended for the extrusion of very thin film for light duty applications. It contains both slip agent and anti blocking additives.

Lotrène® FE 8000 banner

Lotrène® FE 8000

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Melt Flow Index:0.8 - 0.8 g/10 min

Lotrène® FE 8000 is an additive free grade, produced by a high pressure tubular process, mainly recommended for light and medium duty film applications with good optical properties and medium rigidity.

Lotrène® MG 70 banner

Lotrène® MG 70

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Injection Molding
Melt Flow Index:70.0 - 70.0 g/10 min

Lotrène® MG 70 is an injection molding grade mainly recommended for the injection of thin and flexible items and the preparation of masterbatches.

Lotrène® FB 3003 banner

Lotrène® FB 3003

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion
Melt Flow Index:0.3 - 0.3 g/10 min

Lotrène® FB 3003 is an additive free grade, produced by an autoclave high pressure process, mainly recommended for heavy duty film applications.

Lotrène® MG 20 banner

Lotrène® MG 20

Melt Flow Index:20.0 - 20.0 g/10 min

Lotrène® MG 20 is an injection molding grade mainly recommended for the injection molding of thin and flexible items.