Products

Alkatane HD6400 is a high density polyethylene resin specifically designed for use in high speed reciprocating extrusion blow molders providing short cycle times for optimum production efficiency. It has high stiffness to enable the production of light weight food containers featuring excellent organoleptic performance

Alkathene XJF143 is a low density polyethylene designed for a variety of low gage (20 - 50μm) general purpose film applications. Alkathene XJF143 does not contain any additives

Alkathene LDF433 is a low density polyethylene designed for a variety of medium to heavy gage (70 - 200μm) film applications where increased stiffness is required. Alkathene LDF433 is formulated with a process stabilization and antiblock package but contains no slip additives

Alkatane GF7740F2 is a medium molecular weight extrusion grade of high density polyethylene.

Alkatane GF7660 is a medium molecular weight extrusion blow molding grade of High Density Polyethylene. This grade exhibits good ESCR and good toughness.

Alkatane HD1090 is an injection molding grade of High Density Polyethylene with a good balance between flow and impact resistance.

Alkathene XDS34 is a low density polyethylene designed for a variety of heavy gage (70 - 200μm) film applications. Alkathene XDS34 does not contain any additives

Alkatane HD0390 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

Alkatane HD0790 is an injection molding grade of High Density Polyethylene with a good balance between flow and impact resistance

Alkatuff LL425 is a hexene copolymer linear low density polyethylene, designed for high quality cast film applications. Alkatuff LL425 is formulated with stabilization additives, but contains no other additives.

Alkathene LDJ225 is a low density polyethylene designed for use in the production of low gage (20 - 50μm), high quality film. Alkathene LDJ225 is formulated with a process stabilization and antiblock additive package and contains other additives designed to confer very high levels of slip.

Alkathene WRM124 is a high flow low density polyethylene which offers excellent gloss and flow / toughness ratio coupled with a low tendency to warp.

Alkatuff LL438 is a high performance hexene linear low density polyethylene copolymer designed for a variety of applications requiring enhanced sealing characteristics and toughness. Alkatuff LL438 is formulated with process aid and a process stabilization package but contains no slip or antiblocking additives

Alkatuff LL820 is a high flow hexene copolymer linear low density polyethylene designed for general purpose injection molding.

Alkatuff LL601 is a hexene linear low density polyethylene copolymer designed for a variety of general purpose film applications requiring a good balance between stiffness and toughness. Alkatuff LL601 is formulated with process stabilization, antiblocking and slip (high slip) additives

Alkathene LDD205 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) applications in which a high slip film is required. Alkathene LDD205 is formulated with a process stabilization and antiblock additive package and contains additives designed to confer a high level of slip.

Alkathene LDD201 is a low density polyethylene designed for a variety of medium to heavy gage (50 – 150μm) general purpose film applications. Alkathene LDD201 is formulated with a process stabilization additive package but contains no antiblock or slip additives

Alkathene LDJ226 is a low density polyethylene designed for a variety of low gage (20 - 50μm) general purpose applications where antistatic or a low to medium slip film is required. Alkathene LDJ226 is formulated with a process stabilization and antiblock package and contains an antistatic additive

Alkathene WNC199 is an extrusion coating grade exhibiting very low odor and taint and excellent heat seal characteristics. It also has good drawdown allowing low coating weights whilst maintaining very good adhesion to a variety of substances.

Alkathene LDD204 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) applications in which a medium slip film is required. Alkathene LDD204 is formulated with a process stabilization and antiblock additive package and contains additives to confer a medium level of slip

Alkathene LDH215 is a low density polyethylene designed for a variety of medium gage (40-80μm) general purpose applications in which a high slip film is required. Alkathene LDH215 is formulated with a process stabilization and antiblock additive package and contains additives designed to confer a high level of slip

Alkatane HD3690 is a high flow injection molding grade of High Density Polyethylene.

Alkatane GM4755F is a high molecular weight High Density Polyethylene grade with high toughness and stiffness.

Alkatane HD2090 is a high flow injection molding grade of High Density Polyethylene.

Alkathene LDH210 is a low density polyethylene designed for a variety of medium gage (40 - 80μm) general purpose film applications. Alkathene LDH210 is formulated with a process stabilization additive package but contains no antiblock or slip additives.

Alkatane HD1155 is a very high molecular weight High Density Polyethylene copolymer resin, especially formulated for use in large part moldings where strength and rigidity are of importance. It combines excellent impact strength with good ESCR.

Alkathene LD6622 is a high flow injection molding grade of low density polyethylene

Alkathene LD1217 is an extrusion coating grade exhibiting very low odor and taint and excellent heat seal characteristics. It also has good drawdown and very low neck-in allowing low coating weights whilst maintaining very good adhesion to a variety of substances.

LL525 is a hexene copolymer linear low density polyethylene, designed for high quality cast film applications. LL525 is formulated with stabilization additives, but contains no other additives

Alkatane GE4760 is a medium molecular weight, easy flow High Density Polyethylene blow molding grade with excellent organoleptic properties.

Alkathene XLF197 is a low density polyethylene designed for the production of thin gage (less than 20μm) high clarity films. Alkathene XLF197 does not contain any additives.

Alkathene LDD203 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) general purpose film applications. Alkathene LDD203 is formulated with a process stabilization and antiblock additive package but contains no slip additives

Alkatane HD0490 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

Alkathene LDN248 is a medium flow injection molding grade of low density polyethylene.