Products

Composite polymer material based on high density polyethylene with the addition of carbon black and stabilizing additives. It is used for the manufacture of protective anti-corrosion coating of steel pipes by extrusion as an outer layer.

Armlen PP GF MD 30-1 is a 30% glass fiber, thermostabilized, hydrolysis resilient polypropylene. This material displays high mechanical, thermophysical and dielectric properties; is resilient to cold and hot water, alkali, acids, detergents (acetone, spirits etc.), and benzene fumes. This material is compliant with Europesecurity requirements. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in light-gray color.

Armlen PP MD 20-1 is a 20% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP TPE-10-70A is a mineral filled thermoplastic elastomer, based on styrenic block copolymers, contains modifying additives, heat and light stabilizers. Displays high resistance to rigid environments and polar solvents (ether, acetone, spirit), atmosphere and ozone-resistant. Approved for application with edibles and potable war: hot and cold. Designed to replace technical rubbers. Unlike rubber, may be exposed to frequent recycling and dying with super concentrates in the process of products manufacture. Available in natural and light-gray color.

Polypropylene filled with 20% Calcium Carbonate, impact resistant. Main features: High impact resistance, easy to demould, intended for the manufacture of thin-walled products. Available in various colors. Application: plinth siding panels.

Armlen PP TPE-10-75A is a mineral filled thermoplastic elastomer, based on styrenic block copolymers, contains modifying additives, heat and light stabilizers. Displays high resistance to rigid environments and polar solvents (ether, acetone, spirit), atmosphere and ozone-resistant. Approved for application with edibles and potable war: hot and cold. Designed to replace technical rubbers. Unlike rubber, may be exposed to frequent recycling and dying with super concentrates in the process of products manufacture. Available in light-gray color.

Armlen PP MD 40-4M is a 40% mineral filled polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural color.

Armlen PP-3FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

A 70% mineral filled, low-combustible, extrusion polyolefin. Designed for extrusion of intermediate layers in aluminum composite panels applied in construction. Available in natural color.

Armlen PP MD 50-2TS is a 50% mineral filled thermostabilized material, compliant with Europesecurity requirements. Designed for molding of bodywork for electrical and general goods. Available in white and gray colors.

Armlen PP MF 35-1 is a 35% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP-3IM is a Impact modified polypropylene composite material for interior details. Available in different colors.

Armlen PP GF 30-5HS is a 30% glass fiber, thermostabilized polypropylene. This material displays high mechanical and thermal properties; it may be applied as substitution of metals, thermosetting polymers and other thermoplastics in technical products and speciality electronic goods. Designed for injection molding manufacture of various items.

20% Talc filled Impact modified Polypropylene compound, designed for automotive application. Instrumental panel, exterior and interior trims. UV-stabilized.

Armlen PP MD 10-1 is a 10% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in green color.

Armlen PP MF 30-3IM is a 30% mineral filled, impact modified polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural, light beige, beige-yellow, beige-gray and chocolate colors.

Impact modified 10% mineral filled polypropylene composite material for and interior and exterior trims. UV-stabilized. Can be colored-in-mass.

A polyolefin-based, mineral filled, thermo-elastoplastic composite material. Contains modified additives, thermostabilizers and light-stabilizers. Displays a high resistance to ozone and atmosphere, to aggressive environments and polar solvents. Designed for isolation materials manufacture and protective shells for cables and wires; rubbers exploited in a temperature range of -60 °C – 90 °C (capable to withstand a short heat to 105 °C). Unlike rubbers, this material is capable to endure many recycles, along with dye with super concentrates in the process of product manufacture. Available in natural and black colors.

Armlen PP MF 30-3TS is a 30% mineral filled thermostabilized polypropylene. Designed for injection molding of various parts and items for technical and household appliances. Available in white color.

Armlen PP-1FRX is a low-combustible polypropylene. Designed for injection molding and injection molding or extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in black color.

Armlen PP-4FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

Armlen PP-1EX is a frost resistant polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in black color.

Armlen PP E/P 20-5M is a modified composite material. This material displays high elasticity to impact loads, including whilst exploitation in negative temperatures; high elasticity; resistance to frost and alternating loads. Designed for molding of bumpers and other automobile exterior details, including those for further dye with enamels. Available in natural and black colors.

Armlen PP MF 30-1 is a 30% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in white, blue and black.

Armlen PP E/P 15-2LS is a impact modified, light-stabilized polypropylene. This material displays high resistance to impact, including impacts in low temperature environment; high elasticity, frost-resistance and resistance to alternating loads. Designed for bumper manufacture and number of car lining parts, available for further dye with enamels. Available in natural, black, natural, light-gray, gray and graphite.

Armlen PP MF 40-1 is a 40% mineral filled polypropylene, modified. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural, brown, gray and black colors.

An extrusion, elasticized polypropylene. This material displays high mechanical and electrical properties; displays ozoneand atmosphere resistance; is resilient to nonpolar solvents and rigid environments (kerosene, gasoline, benzene etc.). Designed for manufacture of items with high requirements to impact resistance, including those exploited in low temperature environments; items for machine engineering, auto industry, electric appliance, household appliance and etc. Available in black and natural colors

Armlen PP MF 25-1 is a 25% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural, gray and black colors.

Armlen PP-2FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

A 20% glass fiber random-statocopolymer, extrusion material. The recipe of this polypropylene composition obtains a sufficient and optimal range of technical characteristics that avail it to be applied in polypropylene pipes (three layers glass fiber reinforced).

Armlen PP E/P 15-3 is a impact modified composite material. Designed for molding of exterior parts for automobiles: bumpers, fairing etc.), items for technical purposes. Available in black color.

Armlen PP MF 20-7IM is a 20% mineral filled, impact modified polypropylene. This material displays excellent processing qualities, good appearance properties: no gloss, good scratch resistance, no tiger stripes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

Armlen PP GF 25-1IM is a 25% glass fiber, impact modified polypropylene. This material displays high mechanical, thermophysical and dielectric properties; material is resilient to hot and cold water, to nonpolar solvents and rigid environments (kerosene, gasoline, benzene etc.) and alkali and acids. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Available in black color.

A 40% mineral filled, thermostabilized, polypropylene gomopropilen. This material displays high resilience to impact loads, good rigidity and dimensional stability. This material is compliant with European security requirements. Available in white color.

Armlen PP MF 25-2TS is a 25% mineral filled thermostabilized polypropylene. Designed for injection molding of various parts and items for technical and household appliances. Available in natural, white and gray colors.