company tower banner
Ragan & Massey Company Logo

FARMWORKS™ 80/20 SURFACTANT

1 of 8 products in this brand
FARMWORKS 80/20 SURFACTANT is a general purpose surfactant for use with insecticides, fungicides, herbicides, acaricides, defoliants, dessicants, PGR’s and nutritionals. The surface-active agents in FARMWORKS 80/20 SURFACTANT are deisgned to improve wetting and spreading of agricultural sprays on leaf, stem or insect surfaces. It also contains a defoamer that helps suppress spray tank foaming. FARMWORKS 80/20 SURFACTANT is suitable for use where the pesticide label recommends surfactants, spreader or wetter.
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Technologies
Active Ingredient:

Glycerol, Sodium Xylene Sulfanate, Alkyl Phenol Ethoxylate - .80.0%
CONSTITUENTS INEFFECTIVE AS SPRAY ADJUVANT - 20.0%

Features & Benefits

Applications & Uses

Directions For Use

REFER TO PESTICIDE LABEL FOR SPECIFIC CROP USE AND APPLICATION RATES. Mix 0.5 to 4 pints per 100 gallons of spray solution. Use enough FARMWORKS 80/20 SURFACTANT to achieve good wetting, spreading and surface coverage without excessive runoff. NOT FOR AQUATIC USE.
Note: The above use recommendations are considered to be adequate for most uses. Some pesticides, however, may require higher or lower rates for optimum effect. Follow the pesticide label directions when this occurs.

Regulatory & Compliance

Safety & Health

Precautionary Statements

WARNING: Harmful if swallowed. Causes eye and skin irritation. Harmful if inhaled. If medical advice is needed, have product container or label on hand.
Read label before use. Wash protective equipment and work clothes thoroghly after handling. Do not eat, drink or smoke when using this product. Avoid
breathing dust, fume, gas, mist, vapors or spray. Use only outdoors or in well ventilated area.
Personal Protective Equipment: Wear protective gloves, clothing, eye and face protection.

Storage & Handling

Storage And Disposal

Do not contaminate water, food or feed by storage or disposal.
STORAGE: Keep away from heat, sparks and flame. Keep container closed. Store in a dry place between 40°F and 120°F. Partially used  ontainers should be resealed between uses for maximum storage stability.
CONTENT DISPOSAL: Dispose of material in compliance with applicable federal, state and local environmental regulations. Recycle or rework material if at all possible. Incinerate material at an approved facility or treat at an acceptable waste treatment facility or municipal waste treatment plant after proper testing and approval of waste samples.
CONTAINER DISPOSAL: An empty container can contain product residue and should not be reused. If not professionally cleaned and reconditioned, crushing or other means is recommended to prevent unauthorized reuse. Dispose of container to disposal plant in accordance with federal, state and local regulations.