Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Product Characteristics
Glass-fiber reinforced Polyester molding compound
Low mold shrinkage and post-shrinkage, good electrical values, excellent heat resistance, outstanding pourability
Primary application(s): Lamp holders for automobile halogen bulbs
This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Supply form
Low dust granulate in moisture resistant bags
- Processing
- Compression molding
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Compressive strength | 150 - 200 | MPa | ISO 604 |
E-Modulus (flexural test) | 16 - 20 | GPa | ISO 178 |
Flexural strength | 60 - 80 | MPa | ISO 178 |
Impact strength (Charpy) | 3 - 4 | kJ/m² | ISO 179 / 1eU |
Impact strength (Charpy), notched | 2,0 - 2,5 | kJ/m² | ISO 179 / 1eA |
Value | Units | Test Method / Conditions | |
Coeff. of linear thermal expansion (longitudinal,50-100°C) | 10 - 20 | 10-6 / K | ISO 11359-2 |
Flammability | HB / 1,6 | Stufe/mm | UL 94 |
Heat deflection temp. HDT A - 1,80 MPa | min. 200 | °C | ISO 75 |
Heat deflection temp. HDT C - 8,00 MPa | 150 - 170 | °C | ISO 75 |
Maximum application temperature (<50 h) | 200 | °C | IEC 60216/T1 |
Maximum application temperature (20 000 h) | 160 | °C | IEC 60216/T1 |
Thermal conductivity | 0,9 - 1,1 | W / m * K | ASTM E 1461 |
Value | Units | Test Method / Conditions | |
Moulding shrinkage (longitudinal) | 0,3 - 0,6 | % | ISO 2577 |
Post shrinkage (168 h / 110 °C) | max. 0,1 | % | ISO 2577 |
Specific gravity | 2.00 - 2.20 | g/cm³ | ISO 1183 |
Water absorption (24 h / 23 °C) | max. 50 / max. 0,6 | mg / % | ISO 62 |
Apparent Density | 0.90 - 1.10 | g/cm³ | ISO 60 |
Value | Units | Test Method / Conditions | |
Tracking resistance (CTI) | 600 | V | IEC 60112 |
Volume resistivity | 10^13 - 10^14 | Ω cm | IEC 60093 |
Arc resistance | 4 | Stufe | ASTM D 495 |
Dielectric strength | 25 - 35 | kV / mm | IEC 60243-1 |
Dissipation factor (100 Hz/1 MHz) | 0,01-0,03 / 0,01-0,03 | — | IEC 60250 |
Relative permittivity (100 Hz/1 MHz) | 5 - 6 / 4 - 5 | — | IEC 60250 |
Surface resistance | 10^12 - 10^13 | Ω | IEC 60093 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage conditions / shelf life
Keep cool and dry.Minimum shelf life at 20 ± 5 °C:6 months after date of delivery