Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- RECKLI Epoxy WST is used in model- and mold-making, especially when high reactivity and dimensional stability under heat are required.
- For the manufacture of stable backfillings, RECKLI Epoxy WST is mixed with ovendry fillers, such as quartz sand, chalk powder, slag or RECKLI Filler L, yielding an earth-moist ramming mass. To achieve hard, fast-curing compounds, add fine grains or powders of quartz, limestone, slate or wollastonite. The use in the construction-industry is only possible to a limited extent.
- Combined with glass or carbon fibers, RECKLI Epoxy WST yields high-quality laminates or composites for various applications.
- Processing
Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Thereby the incorporation of larger amounts of air should be avoided. Fillers should be preferably added to the mixture rather than to the base component before mixing. Once mixed, the processing of the material must be completed within the pot life (15 _x0013_– _x001e_20 minutes). Mixing larger quantities decreases the processing time.
Properties
- Chemical Resistance
- Physical Form
- Appearance
- Transparent
- Typical Properties
Value | Units | Test Method / Conditions | |
Mixing ratio (base : hardener) | 7:1 | — | (according to weight) |
Workable temperature | -20 | °C | — |
Viscosity of base component | 2500 | mPa.s | ISO 2555 |
Viscosity of base component | 2500 | mPa.s | !SO 2555 |
Pot life (200-g mixture at +21°C) | 15-20 | minutes | — |
Earliest demoulding (at +21°C): | 24 | hours | — |
Full chemical and mechanical loading after: | 7 - 10 | days | — |
Density | 1.3 | g/cm³ | — |
Hardness | 45 | Shore A | DIN 53505 |
Ball impression hardness | 55 - 60 | N/mm² | DIN 53456 |
Dimensional stability under heat | 60 | °C | DIN 53462 |
Heat Resistance (Dry Heat) | approx. 100 | °C | — |
Technical Details & Test Data
- Technical Data
Hardening progress at 21°C Shore D 53505 Ball impression hardness DIN 53456 After _x0014_3 hours 64 40 After _x0014_4 hours 72 40 After _x0014_5 hours 75 83 After _x0014_6 hours 76 94 After _x0014_7 hours 76 97 After _x0014_8 hours 76 100 After _x0014_24 hours (1 day) 79 127 After _x0014_48 hours (2 days) 80 127 - Surface Preparation
For coatings or adhesions, the substrate must be stable, sound, dry, clean and free of oil, grease or wax.
Safety & Health
- Safety
- Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.
- This pamphlet replaces all previously published pamphlets concerning RECKLI Epoxy WST, stating them as no longer being valid.
Packaging & Availability
- Packaging Sizes
- Double drum: 4_x001d_ kg | Double can: 0.8 kg
- The hardener is enclosed in the lid.
Storage & Handling
- Storage
Store in a dry place at room temperature. RECKLI Epoxy WST is storable for _x0011_6 months from delivery when kept in the closed original packaging at about _x001f_18°C. Opened drums must be closed airtight right after use.