Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- RECKLI Flooring Resin EP can be used as a binder for the manufacture of synthetic resin screeds or scratch coats. Its low viscosity allows an easy processing and a high laying performance.
- Mixtures of RECKLI Flooring Resin EP with appropriate fillers and additives yield screeds that are impervious to fluids. For this purpose, the recommended resin content is 10 - 12 % (by weight). Only use oven-dry fillers, such as sand, gravel, corundum- or basalt-grainings or, likewise, quartz-, chalk- or marble powder.
- Furthermore, RECKLI Flooring Resin EP is suitable as an adhesive primer with a good penetration of the substrate. For this purpose, RECKLI Flooring Resin EP without fillers is generously applied by brush or by roller. To ensure a good bonding, proceed wet-on-wet or sprinkle oven-dry quartz sand on the wet coat, making sure it is completely covered. Excess material must be thoroughly swept off or vacuumed the following day.
- Processing
Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Thereby the incorporation of larger amounts of air should be avoided. Fillers should be preferably added to the mixture rather than to the base component before mixing. Once mixed, the processing of the material must be completed within the pot life (_x0013_40 - 50 minutes). Mixing larger quantities decreases the processing time.
Properties
- Chemical Resistance
- Physical Form
- Appearance
- Transparent
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mixing ratio (base : hardener) | 3:1 | — | (according to weight) |
| Workable temperature | -20 | °C | — |
| Viscosity of the mixture | approx. 350 | mPa.s | !SO 2555 |
| Pot life (200-g mixture at +21°C) | approx. 40 - 50 | minutes | — |
| Full chemical and mechanical loading after: | 10 - 12 | days | — |
| Density | 1.1 | g/cm³ | — |
| Hardness | approx. 73 | Shore A | DIN 53505 |
| Ball impression hardness | 50 - 55 | N/mm² | DIN 53456 |
| Dimensional stability under heat | 40 | °C | DIN 53462 |
| Heat Resistance (Dry Heat) | 100 | °C | — |
Technical Details & Test Data
- Technical Data
Hardening progress at 21°C Shore D 53505 Ball impression hardness DIN 53456 After _x0014_1 day Not Measurable Not measurable After 3 days 63 20 After 7 days 72 47 After _x0014_14 days 74 53 - Surface Preparation
For coatings or adhesions, the substrate must be stable, sound, dry, clean and free of oil, grease or wax.
Safety & Health
- Safety
- Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.
- This pamphlet replaces all previously published pamphlets concerning RECKLI Flooring Resin EP, stating them as no longer being valid.
Packaging & Availability
- Packaging Type
- Packaging Sizes
- Pair of canisters: _x001e_8 kg;
- Double can: 0.8 kg (the hardener is enclosed in the lid).
Storage & Handling
- Storage
Store in a dry place at room temperature. RECKLI Flooring Resin EP is storable for 6 months from delivery when kept in the closed original packaging at about _x001e_18°C. Opened drums must be closed airtight right after use.