Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
RECKLI Injection Resin EP is suitable for filling hairline cracks in concrete components. The resin is applied by casting or with the help of low- or highpressure injection pumps. Its low viscosity and its long pot life ensure proper filling of even finest cracks.
- Processing
Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Thereby the incorporation of larger amounts of air should be avoided. Fillers should be preferably added to the mixture rather than to the base component before mixing. Once mixed, the processing of the material must be completed within the pot life (_x0010_80 – 90_x001c_ minutes). Mixing larger quantities decreases the processing time.
Properties
- Chemical Resistance
- Physical Form
- Appearance
- Transparent
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mixing ratio (base : hardener) | 3:1 | — | (according to weight) |
| Workable temperature | -20 | °C | — |
| Viscosity of the mixture | approx. 300 | mPa.s | !SO 2555 |
| Pot life (200-g mixture at +21°C) | approx. 80 - 90 | minutes | — |
| Full chemical and mechanical loading after: | 14 - 21 | days | — |
| Density | 1.1 | g/cm³ | — |
| Hardness | approx. 70 | Shore D | DIN 53505 |
| Ball impression hardness | 45 - 50 | N/mm² | DIN 53456 |
| Dimensional stability under heat | 38 | °C | DIN 53462 |
| Heat Resistance (Dry Heat) | 100 | °C | — |
Technical Details & Test Data
- Technical Data
Hardening progress at 21°C Shore D 53505 Ball impression hardness DIN 53456 After _x0014_1 day Not Measurable Not measurable After 3 days 59 12 After 7 days 70 35 After _x0014_14 days 72 45 - Surface Preparation
The substrate must be stable, sound, dry, clean and free of oil, grease or wax.
Safety & Health
- Safety
- Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.
- This pamphlet replaces all previously published pamphlets concerning RECKLI Injection Resin EP, stating them as no longer being valid.
Packaging & Availability
- Packaging Type
- Packaging Sizes
- Pair of canisters: _x001e_32 kg | _x0010_8 kg;
- Double can: 0.8 kg (the hardener is enclosed in the lid).
Storage & Handling
- Storage
Store in a dry place at room temperature. RECKLI Injection Resin EP is storable for _x0012_6 months from delivery when kept in the closed original packaging at about _x0010_18°C. Opened drums must be closed airtight right after use.