Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

BECKOSOL® 12102-E2 is a short TOFA chain-stopped alkyd supplied in a blend of tertiary butyl acetate, n-butyl acetate and Aromatic 100 solvents.

EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin designed to formulate with lower co-solvent demand than standard water reducible epoxy ester resins. EPOTUF® 38-694 is an extremely stable water soluble resin giving up to 20 plus weeks in a white enamel at 120 F. This resin can be used in high gloss enamels or primers

FINE-CLAD® A-241 is a resin with both hydroxyl and glycidyl groups. It is designed to reduce pinholes and improve stain resistance in powder coatings.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

Amberlac® 13802-E2 is a dehydrated castor oil based acrylic modified alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents. This is the same polymer as Amberlac® 13-802 (Xylene).

FINE-CLAD® M-8025 is a hydroxyl-functional polyester. It is designed to cure by urethane cross-linkers where it imparts high hardness, good weather resistance, and excellent stain resistance.

KELSOL® 3964-B2G-70 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

AROFLINT® D808-XD-71 is a high acid value polyester supplied at 71% solids in an aromatic solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® CS60 is a versatile short soya oil alkyd resin designed mainly for industrial coatings and car refinish.

FINE-CLAD® M-8930 is a carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for standard weathering with excellent physical properties.

AROPLAZ® 5293-B-75 is a water-dispersible polyester resin designed for conventional bake coatings. Selection of amino crosslinker and neutralization agent provides maximum film properties.

BECKOSOL® 10-015 is a phenolic-modified alkyd designed for use as the sole vehicle or as a modifier for medium oil alkyds.

BECKOSOL® 13-4360-X is a chain-stopped alkyd, soyabean oil in xylol

EPOTUF 37-685 is a patented amine functional dispersion that is used to formulate two component water-borne epoxy coatings with properties comparable to conventional solvent based two component epoxy coatings.

BECKOSOL® 15-215 is a short soya oil alkyd resin designed mainly for 2 component architectural clears and NC lacquers, industrial coatings and car refinish.

AROFLINT® 810 is an acid functional polyester resin supplied at 70% solids in a HAPS compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

BECKOSOL® 15-120 is multi-purpose short soya oil alkyd resin designed mainly for industrial coatings, such as enamels, primers, NC lacquers and car refinish.

AROFLINT® 303-X-90 is an oxirane-modified ester supplied at 90% solids in xylene. It is used in combination with high acid value polyesters such as AROFLINT® 252-Z1-60, 404-XX-60, D808-XD-71, 809, or 810 at various ratios to yield high performance coatings where excellent appearance and toughness are required.

AROFLINT® 404-XX-60 is a high acid value polyester supplied at 60% solids in an exempt solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent