Products

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

UROTUF F89-E3M-55 is a linseed oil modified urethane resin provided at 55% solids in a blend of low aromatic Mineral Spirits and volatile methyl siloxane (exempt) solvent.

UROTUF® L54-MPW-32 is a fully reacted, aliphatic, thermoplastic urethane dispersed in a blend of water, N-methylpyrrolidone, and amines. UROTUF® L54-MPW-32 is suitable for both air-dry and force-dry applications.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

AROPLAZ® 15-173 is a saturated polyester alkyl modified recommended to formulate polyurethane and melamine crosslinkable industrial finishes.

UROTUF F101-MPW-45 is a high solids anionic stabilized oil modified urethane polymer provided at 45% solids in a blend of N-methyl pyrrolidinone and water.

BECKOSOL AQ 102 is a long oil soya alkyd latex designed for use in wiping stains. BECKOSOL AQ 102 requires no coalescing solvent for film formation, and wiping stains can meet all current or pending AIM VOC regulations in the US and Canada. BECKOSOL AQ 102 does not contain alkyl phenol ethoxylates.

UROTUF E300-W-40 is a UV curable coating resin based on an anionic stabilized dispersion of an aliphatic urethane polymer provided at 40% solids in water.

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.

UROTUF® F14-M-55 is a one-package, soya oil modified urethane alkyd, ASTM Type I, which cures by oxidation at ambient temperatures in the presence of metallic driers to produce fast dry, mar-resistant, clear or pigmented, decorative and maintenance finishes

UROTUF® F48-M-50 is a one-package, ASTM Type I oil modified urethane, based on soybean oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

UROTUF® F78-M-50 & F78-X-50 are one-package, oil modified urethanes ASTM Type I, which cure by oxidation at ambient temperatures in the presence of metallic driers. They may be blended with alkyds to improve dry time and abrasion resistance. They contains no free isocyanate.

AMBERLAC® 15-255 is a urethane modified alkyd resin designed to formulate solvent borne 1k PU systems for wood, floor and marine varnishes

UROTUF® F18-M-60 is a one-package, tall/linseed oil-modified urethane, ASTM Type I, which cures by oxidation at ambient temperatures in the presence of metallic driers to produce fast-dry, mar-resistant, clear or pigmented, decorative and maintenance finishes

BECKOSOL® 1351 is a long castor alkyd plasticizer containing no solvents.

UROTUF® L63-MPW-3 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in a blend of N-methyl pyrrolidinone and water.

UROTUF® F99-MPW-36 is an anionic stabilized oil modified urethane polymer provided at 36% solids in a blend of N-methyl pyrrolidinone and water.

KELSOL® DV-1469 is a chemically modified linseed oil supplied without solvent. It can be reduced with water and does not required amine neutralization. Co-solvent, if used, is lost by evaporation during drying.

UROTUF® F19-M-50 is a fast-drying, oil modified polyurethane solution characterized by extremely pale color both in solution and in films.

UROTUF® F100-W-36 is a linseed oil modified urethane resin supplied at 75% solids in Low Aromatic Mineral Spirits. This product is designed for formulating 275 g/L VOC varnishes

UROTUF F100-W-36 is an anionic stabilized dispersion of an oil modified urethane polymer provided at 36% solids in water. This resin is similar to UROTUF F97-MPW-33 but contains no cosolvent.

UROTUF® F97-MPW-33 is a waterborne, oil modified urethane dispersion designed for single package, self-crosslinking coatings and varnishes requiring VOC regulatory compliance combined with a high level of performance.

UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of water and N-methyl pyrrolidone. UROTUF® L51-35 is a higher solids version of UROTUF® L51, which allows for greater formulating latitude.

UROTUF L63-W-38 is an anionic stabilized aliphatic urethane polymer provided at 38% solids in water. This is the solvent free version of UROTUF L63-MPW-38.

BECKOSOL® 10-539 is a high-solids, long-oil alkyd developed for use in VOC-compliant architectural enamels, maintenance coatings, and metal primers.

UROTUF® F78-M-50 & F78-X-50 are one-package, oil modified urethanes ASTM Type I, which cure by oxidation at ambient temperatures in the presence of metallic driers. They may be blended with alkyds to improve dry time and abrasion resistance. They contains no free isocyanate.

KELSOL® 3939-WG4-45 is a chemically modified linseed oil supplied as a neutralized solution in water and co solvent.