Products

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

AROLON® 850-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on a variety of engineering grade plastics and metals. It is supplied at a slightly basic pH and contains no organic solvent. AROLON® 850-W-45 is recommended for air dry, force dry, and baking primers and/or topcoats for plastics and metals.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.

AROLON® 15-1044-XBLF is a thermosetting acrylic resin, acrylamide type

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

Thermoplastic polymer emulsion offering fast air dry and excellent water and humidity resistance.

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.

This elastomeric acrylic emulsion was developed for use in wall coatings and other applications that require water resistance and flexibility. These coatings help protect and extend the useful life of stucco and masonry surfaces by providing an effective moisture barrier.

AROLON® 847-W-42 is a styrenated acrylic emulsion designed to provide early water-spot resistance and very good corrosion resistance coupled with inhibitive pigment stability. It offers early water-spot resistance, high gloss and good chemical resistance.

AROLON® 6436 is an acrylic polyol resin designed for high solids, high performance polyurethane coatings. Low VOC (420 grams per liter) polyurethane coatings can be easily formulated with standard aliphatic isocyanates. AROLON® 6436 has a high equivalent weight for economy in use.

SYNTHEMUL® 40152-08 is a 55% solids, high-scrub vinyl, acetate acrylic latex designed for interior architectural coatings.

AROLON® 559-G4-70 is a non-oxidizing, water-dispersible, acrylic resin for formulating thermosetting coatings crosslinked with aminoplast resins. The uncrosslinked polymer is a hard film former. AROLON® 559 is cut in 2 butoxy ethanol and gives improved viscosity reduction. The resin should be neutralized with a volatile amine before dilution with water.

AROLON® 15-2034-SBL, is a thermosetting acrylic resin, hidroxiacrylic type 55% solids in Solvesso 150/Butyl glycol / Etylene glycol/n-Butanol.

SYNTHEMUL® 90-416 is a high performance; ultra-low VOC acrylic latex ideal for cosolvent-free exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. SYNTHEMUL® 90-416 can be formulated at less than 20 gram/liter VOC, giving the paint formulator more latitude in meeting current and future environmental regulations.

AROLON® 860-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on concrete, a variety of metals, and engineering grade plastics. It offers excellent mechanical stability, fast air dry and good gasoline resistance.

SYNTHEMUL® 40-136 is a 55%-solids, conventional, vinyl acrylic latex copolymer that provides excellent paint viscosity, low-temperature film formation, and ease of formulation.