Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

Aroplaz AQ™ 205 has been specially designed to protect topcoats from a variety of everyday stains. Primers formulated with Aroplaz AQ™ 205 outperform a best-selling commercial waterborne stain-blocking primer.

BECKOSOL® 12102-E2 is a short TOFA chain-stopped alkyd supplied in a blend of tertiary butyl acetate, n-butyl acetate and Aromatic 100 solvents.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

BECKOSOL® 12-079 is a phenolic modified alkyd designed for use with flash-dry primers intended to be used under enamel and lacquer topcoats.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

BECKOSOL® 15-110 is a 100% N.V. medium soya oil alkyd resin designed mainly for industrial, graphic arts and traffic paints.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.

AMBERLAC® P 885 is a phenolic rosin modified alkyd resin, recommended for industrial enamels and primers and architectural enamels and clears

AMBERLAC® 13-802 is an acrylic-modified alkyd which offers fast dry, good color retention and excellent hardness.

KELSOL® 3912-G4-75 is a water reducible alkyd designed to give higher solids at lower viscosity. It must be neutralized prior to the addition of water, and usually requires additional co-solvent for best solubility and stability in water thinned paints

BECKOSOL AQ 102 is a long oil soya alkyd latex designed for use in wiping stains. BECKOSOL AQ 102 requires no coalescing solvent for film formation, and wiping stains can meet all current or pending AIM VOC regulations in the US and Canada. BECKOSOL AQ 102 does not contain alkyl phenol ethoxylates.

BECKOSOL AQ 210 is a chain-stopped medium oil alkyd latex based on bio-renewable oils that combines excellent adhesion to metal with good corrosion resistance. BECKOSOL AQ 210 requires no coalescing solvent for film formation and produces AIM compliant metal primers that develop the performance of traditional solvent-borne products. BECKOSOL AQ 210 does not contain alkyl phenol ethoxylates.

BECKOSOL® 1272 is a 100% solids, long oil soya alkyd which offers a wide range of compatibility with other film formers.

BECKOSOL® 4026-M-66 is a long-oil, soya alkyd supplied at 60% non-volatile in mineral spirits.

BECKOSOL® 6422-K3-75 is a non-HAPs, short oil, chain-stopped alkyd in methyl propyl ketone for air dry or low temperature bake high solids industrial coatings.

BECKOSOL® 663-X-50 is a short rosin and phenolic modified oxidizing alkyd solution available in xylene. It meets Government Specifications TT-E-515a (Enamel, Alkyd, Lusterless, Quick-Drying) and TT-P-664c (Primer Coating, Synthetic, Rust-Inhibiting, Lacquer-Resisting).