Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

BECKOSOL® P470 is a versatile long soya oil alkyd resin designed mainly for architectural coatings.

BECKOSOL® 12-079 is a phenolic modified alkyd designed for use with flash-dry primers intended to be used under enamel and lacquer topcoats.

UROTUF® L53-MPW-30 is a fully reacted, color-retentive, thermoplastic, urethane dispersed in a blend of water and N-methyl pryrrolidone.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

EPOTUF® 10-503 TMPTA 85/15 is a reactive epoxy-acrylic with 15% TMPTA (trimethylolpropane triacrylate). EPOTUF® 10-503 TMPTA 85/15 is specially designed for coatings cured by “Ultra-Violet (U.V.)” irradiation applied through printing systems as offset system, serigraphy and metallographic. It can also be used in coatings, varnishes and primers for wood and plastics.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer containing no free isocyanate groups.

Beckosol® 3758-M-85 (formerly Kelvar® 3758-M-85) is a phenolic-modified drying oil for use in direct production of coating vehicles without cooking. Cold blends with resins, such as phenolics, hydrocarbon resin, and oilmodified urethanes and alkyds, will produce finished exterior coating systems of high durability and chemical resistance.

AMBERLAC® P 885 is a phenolic rosin modified alkyd resin, recommended for industrial enamels and primers and architectural enamels and clears

BECKOSOL® 4026-M-66 is a long-oil, soya alkyd supplied at 60% non-volatile in mineral spirits.

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.

AMBERLAC® 13-031 is a styrene-modified alkyd resin for use in air or force-dry enamels.

This elastomeric acrylic emulsion was developed for use in wall coatings and other applications that require water resistance and flexibility. These coatings help protect and extend the useful life of stucco and masonry surfaces by providing an effective moisture barrier.

BECKOSOL® 15-131 is a medium soya oil alkyd resin designed mainly for industrial, car refinish and architectural coatings.

AMBERLAC® 15-255 is a urethane modified alkyd resin designed to formulate solvent borne 1k PU systems for wood, floor and marine varnishes

AMBERLAC® 15-264 is resinous phenolic oil diluted in aromatic solvents, developed to be used as a vehicle for aluminum paints and quick drying inks. This product features excellent gloss and adhesion and is appropriate for air dry or forced cure enamels, primers, varnishes, interior drums enamels, roller applied paints or as a grinding vehicle.

EPOTUF® 38-692 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhibits good compatibility with inhibitive pigments. Temperatures during the grind phase should not exceed 140 F.

SYNTHEMUL® 40152-08 is a 55% solids, high-scrub vinyl, acetate acrylic latex designed for interior architectural coatings.

UROTUF® F99-MPW-36 is an anionic stabilized oil modified urethane polymer provided at 36% solids in a blend of N-methyl pyrrolidinone and water.

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

KELSOL® 3906-B2G-75 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It offers good humidity and water resistance. * This product is also available in a HAPs-free solvent

BECKOSOL® 10-060 is a pure, soya-based, long oil alkyd that meets the requirements of Federal Specification TT R 266 Type I Class A.