Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

AMBERLAC® 13-802 is an acrylic-modified alkyd which offers fast dry, good color retention and excellent hardness.

Thermoplastic polymer emulsion offering fast air dry and excellent water and humidity resistance.

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.

AMBERLAC® 13-031 is a styrene-modified alkyd resin for use in air or force-dry enamels.

This elastomeric acrylic emulsion was developed for use in wall coatings and other applications that require water resistance and flexibility. These coatings help protect and extend the useful life of stucco and masonry surfaces by providing an effective moisture barrier.

AROPLAZ® 4097-WG4-55 is a water-dispersible, acrylic-modified polyester resin for formulating low-VOC coatings crosslinked with aminoplast resins. No additional coupler solvent, beyond that supplied with the resin, is required.

AROLON® 847-W-42 is a styrenated acrylic emulsion designed to provide early water-spot resistance and very good corrosion resistance coupled with inhibitive pigment stability. It offers early water-spot resistance, high gloss and good chemical resistance.

UROTUF® F83-M-75 is a high solids oil modified urethane developed for use in 350 G/L floor varnishes.

AROLON® 6436 is an acrylic polyol resin designed for high solids, high performance polyurethane coatings. Low VOC (420 grams per liter) polyurethane coatings can be easily formulated with standard aliphatic isocyanates. AROLON® 6436 has a high equivalent weight for economy in use.

UROTUF® F48-M-50 is a one-package, ASTM Type I oil modified urethane, based on soybean oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

FINE-CLAD® M-8930 is a carboxyl polyester designed to cure by triglycidyl isocyanurate (TGIC) crosslinkers for standard weathering with excellent physical properties.

UROTUF® F78-M-50 & F78-X-50 are one-package, oil modified urethanes ASTM Type I, which cure by oxidation at ambient temperatures in the presence of metallic driers. They may be blended with alkyds to improve dry time and abrasion resistance. They contains no free isocyanate.

EPOTUF® 37-625 is a reactive polyamide resin based on dimerized fatty acid and polyethylene amines. EPOTUF® 37-625 reacts at room temperature with solid or liquid epoxy resins.

AROPLAZ® 6126-Z-65 is a linear saturated polyester for flexible melamine crosslinked baking enamels.

UROTUF® F87-M-80 is a high solids, aromatic oil modified urethane resin for interior trade sales finishes with a formulated VOC less than 300 grams per liter (2.9 pounds per gallon