Products

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

BECKOSOL® 10-029 is a long-oil alkyd at 70% non-volatile in mineral spirits for use in quality gloss enamels.

AROLON® 850-W-45 is an acrylic copolymer emulsion designed for primer and topcoat use on a variety of engineering grade plastics and metals. It is supplied at a slightly basic pH and contains no organic solvent. AROLON® 850-W-45 is recommended for air dry, force dry, and baking primers and/or topcoats for plastics and metals.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

BECKOSOL AQ 400 is a short oil chain-stopped alkyd latex based on a biorenewable oil specifically designed for non-highway pavement marking paint. BECKOSOL AQ 400 requires no coalescing solvent for film formation and is free of alkyl phenol ethoxylates.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

BECKOSOL® 11-081 is a medium oil soya alkyd for both air-dry and bake systems.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

UROTUF® F97-MPW-33 is a waterborne, oil modified urethane dispersion designed for single package, self-crosslinking coatings and varnishes requiring VOC regulatory compliance combined with a high level of performance.

BECKOSOL AQ 510 is a natural oil based alkyd/acrylic copolymer hybrid latex designed to produce coatings with good cure speed and film toughness. Primers based on BECKOSOL AQ 510 show good enamel hold-out. BECKOSOL AQ 510 requires no coalescing solvent for film formation and produces enamels that meet all AIM VOC limits in the US and Canada. BECKOSOL AQ 510 does not contain alkyl phenol ethoxylates.

UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of water and N-methyl pyrrolidone. UROTUF® L51-35 is a higher solids version of UROTUF® L51, which allows for greater formulating latitude.

AROFLINT® 810 is an acid functional polyester resin supplied at 70% solids in a HAPS compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

AROPLAZ® 6749-XA6-90 is an economical, high-solids, saturated polyester resin that produces films with an excellent hardness/flexibility relationship when crosslinked with an appropriate aminoplast resin.

Thermosetting phenol resol in organic solvent designed for interior can coatings. It offers excellent flexibility and good adhesion.