Products

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

FINE-CLAD® M-8710 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

UROTUF® F982-MPW-33 is an anionic water-borne oil modified urethane coating resin provided at 32% solids in a blend of N-methyl pyrrolidinone and water. This resin is similar to Urotuf F97-33 but has the metallic drier already incorporated for convenience.

SYNTHEMUL® ATP 101 is a acrylic thermoplastic resin in Toluene

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

RESAFEN® 1410 is a ketone-formaldehyde resin designed mainly for pigment dispersion mostly used in flexographic arts inks.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

BECKOSOL® 15-217 is a versatile coconut oil alkyd resin designed mainly for industrial coatings.

AROLON® 820-W-49 is a thermoplastic, styrene acrylic emulsion designed for air dry applications.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels