Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Izod Impact, Notched (-30°C) | 20.0 | kJ/m | ISO 180/1A |
| Izod Impact, Notched (23°C) | 22.0 | kJ/m | ISO 180/1A |
| Izod Impact, un-notched (-30°C) | NB | kJ/m | ISO 180/1 |
| Izod Impact, un-notched (23°C) | NB | kJ/m | ISO 180/1U |
| Strain at Break (23°C) | 3.0 | % | ISO 527 |
| Stress at Break (23°C) | 200.0 | MPa | ISO 527 |
| Tensile Modulus (23°C) | 14000.0 | MPa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Abbreviation | PA6-I GF50 | - | ISO 1043 |
| Density | 1.54 | g/cm3 | ISO 1183 |
| Moisture Absorption (50% RH, 23 °C) | 1.4 | % | ISO 62 |
| Moisture Content | max. 0.2 | % | ISO 15512 |
| Molding Shrinkage (Parallel / Normal) | 0.2 - 0.9 | % | ISO 15512 |
| Value | Units | Test Method / Conditions | |
| Heat Deformation Temperature (0.45 MPa ) | 220.0 | °C | ISO 75 |
| Heat Deformation Temperature (1.80 MPa) | 210.0 | °C | ISO 75 |
| Melting Temperature (10 K/min) | 223.0 | °C | ISO 11357 |
| Vicat Softening Temperature (50N) | 210.0 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index (Solution A) | 500.0 | V | IEC 60112 |
| Surface Resistivity | 10000000000000.0 | Ohm | IEC 60093 |
| Volume Resistivity | 1.0e+15 | Ohm. cm | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (0.75 mm) | HB | - | UL 94 |
| Flame Rating (1.6mm) | HB | - | UL 94 |
| Value | Units | Test Method / Conditions | |
| Back Pressure | Low | - | - |
| Drying | 80 / 2 - 4 | °C/hr | - |
| Feed Throat Temperature | 60 - 80 | °C | - |
| Hold Pressure | 50 - 100 | - | - |
| Injection Speed | Fast | - | - |
| Mold Temperature | 60 - 100 | MPa | - |
| Processing Temperature | 250 - 270 | °C | - |
Regulatory & Compliance
- Certifications & Compliance