Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
Value | Units | Test Method / Conditions | |
Izod Impact, Notched (-30°C) | 18.0 | kJ/m | ISO 180/1A |
Izod Impact, Notched (23°C) | 20.0 | kJ/m | ISO 180/1A |
Izod Impact, un-notched (-30°C) | 100.0 | kJ/m | ISO 180/1 |
Izod Impact, un-notched (23°C) | 110.0 | kJ/m | ISO 180/1U |
Strain at Break (23°C) | 2.5 | % | ISO 527 |
Stress at Break (23°C) | 220.0 | MPa | ISO 527 |
Tensile Modulus (23°C) | 16000.0 | MPa | ISO 527 |
Value | Units | Test Method / Conditions | |
Abbreviation | PA6 GF50 | — | ISO 1043 |
Density | 1.56 | g/cm3 | ISO 1183 |
Moisture Absorption (50% RH, 23 °C) | 1.5 | % | ISO 62 |
Moisture Content | max. 0.2 | % | ISO 15512 |
Molding Shrinkage (Parallel / Normal) | 0.1 - 0.9 | % | ISO 15512 |
Value | Units | Test Method / Conditions | |
Heat Deformation Temperature (0.45 MPa ) | 220.0 | °C | ISO 75 |
Heat Deformation Temperature (1.80 MPa) | 215.0 | °C | ISO 75 |
Melting Temperature (10 K/min) | 223.0 | °C | ISO 11357 |
Vicat Softening Temperature (50N) | 215.0 | °C | ISO 306 |
Value | Units | Test Method / Conditions | |
Comparative Tracking Index (Solution A) | 500.0 | V | IEC 60112 |
Surface Resistivity | 10000000000000.0 | Ohm | IEC 60093 |
Volume Resistivity | 1.0e+15 | Ohm. cm | IEC 60093 |
Value | Units | Test Method / Conditions | |
Flame Rating (0.75 mm) | HB | — | UL 94 |
Flame Rating (1.6mm) | HB | — | UL 94 |
Value | Units | Test Method / Conditions | |
Back Pressure | Low | — | — |
Drying | 80 / 2 - 4 | °C/hr | — |
Feed Throat Temperature | 60 - 80 | °C | — |
Hold Pressure | 50 - 100 | — | — |
Injection Speed | Fast | — | — |
Mold Temperature | 60 - 100 | MPa | — |
Processing Temperature | 250 - 270 | °C | — |
Regulatory & Compliance
- Certifications & Compliance