Products

Resinoid Engineering Corporation

20 Products found on Resinoid Engineering Corporation in Other Industrial Applications

TDSWith TDS

Resinoid Engineering Corporation Resinoid Compound 1322

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid Compound 1322 is a glass reinforced, two step molding compound. It may be preformed. Recommended for transfer, injection or compression molding

Resinoid Engineering Corporation Resinoid Compound 2020

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2020 is a fabric reinforced, two-step phenolic molding compound. It exhibits excellent moldability in transfer molding. It possesses excellent dimensional stability and impact strength properties. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid Engineering Corporation Resinoid Compound 2277

Functions:Molding Compound
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Resinoid Engineering Corporation Resinoid Compound 2005

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material, Cellulose Fibers
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2005 is a cellulose reinforced, two-step phenolic molding compound. It exhibits excellent electrical and thermal properties and dimensional stability. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 1360HR

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1360HR is a glass reinforced, two-step phenolic molding compound. It exhibits outstanding impact strength, electrical and thermal properties. It is particularly suitable for high temperature and strength applications. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 2002-4A

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid Engineering Corporation Resinoid Compound 1371

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1371 is a glass reinforced, two-step phenolic molding compound offering good mechanical and electrical properties. This product has been specifically formulated for applications requiring prolonged exposure to elevated temperatures andresistance to thermal shocks.This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 1382

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1382 is a glass reinforced, two-step phenolic molding compound formulated for applications requiring exceptional tensile strength. It has been used to replace cast aluminum in certain applications. Resinoid 1382 exhibits excellent dimensional stability, electrical and thermal properties. It is supplied in pelletized form for use in injection, transfer, and compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 2089

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

Resinoid Engineering Corporation Resinoid Compound 2016P

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2016P is a fabric reinforced, two-step phenolic molding compound offering excellent resistance to mechanical shock. It is supplied in pellet form suitable for transfer and compression molding. This material can also be used in injection molding systems with deep flight screws

Resinoid Engineering Corporation Resinoid Compound 2215

Functions:Molding Compound
Processing Methods:Transfer Molding, Injection Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

Resinoid Engineering Corporation Resinoid Compound 2002-C5

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid Engineering Corporation Resinoid Compound 1328

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1328 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for applications requiring exceptional tensile strength such as grinding wheels. Resinoid 1328 exhibits excellent electrical and thermal properties as well as dimensional stability. This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 1550

Functions:Prepreg, Molding Compound
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1550 is a milled glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated at a 2.47 specific gravity. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Resinoid Engineering Corporation Resinoid Compound 1365

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1365 is a glass reinforced, two-step phenolic molding compound offering excellent mechanical strength as well as good electrical and thermal characteristics. This material is offered as a moderate size pellet suitable for compression and transfer molding. It can be used in injection molding systems with deep flight screws.

Resinoid Engineering Corporation Resinoid Compound 1345

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1345 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for molded electric motor commutators where performance for prolonged periods at elevated temperatures while under centrifugal loads is critical.This material comes in pelletized from and is suitable for injection, transfer or compression molding.

Resinoid Engineering Corporation Resinoid Compound 1528

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1528 is a glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated for use in automotive applications. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment

Resinoid Engineering Corporation Resinoid Compound 2101

Functions:Molding Compound
Processing Methods:Transfer Molding, Injection Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2101 is an organic fiber reinforced, two-step phenolic molding compound. It was specifically developed for molded parts requiring nominal mechanical strengths and excellent electrical properties. This material comes in pelletized form an d in grades suitable for injection, transfer or compression molding.

Resinoid Engineering Corporation Resinoid Compound 2016

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2016 is a fabric reinforced, two-step phenolic molding compound. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid Engineering Corporation Resinoid Compound 1505

Functions:Molding Compound, Prepreg
Polymer Name:Phenolic Compound
Reinforcement Material:Glass Fibers
Processing Methods:Compression Molding, Transfer Molding, Injection Molding
End Uses:Switches, Footwear, Electric Motors, Electrical Housing, Automotive Under The Hood, Valves, Wheels

Resinoid 1505 is a milled glass reinforced, two-step phenolic molding compound offering good mechanical and electrical properties. This product has been specifically formulated for electrical applications where very low post-molded shrinkage is desired. This material comes in granular form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.