Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Composites End Use
- Applications
- The standard procedure of working with epoxy systems applies to this system. The gelcoat can be applied by brush or by roller.
- It is recommended to have workshop temperature conditions between 18-25°C in order to facilitate the mixing. A lower temperature will increase the viscosity of the mix as well as its pot life. On the contrary, a higher temperature will reduce the viscosity and the pot life of the mix.
Properties
- Color
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density (23°C) | 1.71 | — | — |
| Mix Viscosity (23°C) | 1.61 | mPa.s | — |
| Mix Viscosity (23°C) | 13 000 | mPa.s | — |
| Viscosity (23°C) | 150 000 | mPa.s | — |
Technical Details & Test Data
- Curing Cycles
Curing Cycles To (°C) 24h at 23°C Brittle Minimum: 8h at 50°C 74 C 8h at 50°C+ 3h at 90°C+ 3h at 120°C + 3h at 150 C 172°C 8h at 50'C+3h at 90°C+3h at 120°C+3h at 150°C+ 1h at 200°C 205°C Tamax: 223°C
- Reactivity
System GC HT210 BLACK/ GC HT216
Reactivity on 70mL at 23°C (thickness -4cm) 9h30min Time at exothermic peak on 70mL at 23°C 7h30min Temperature at exothermic peak on 70mL at 23°C 29°C Gel time on 2mm film at 23°C 9h40min
Safety & Health
- Health & Safety
Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be Worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek medical attention. Ensure adequate ventilation in work areas. Respiratory protection should be worn with ABEKP coded filters. RESOLTECH issues full Material Safety Data Sheet for all hazardous products.
Packaging & Availability
- Packaging Type
- Packaging
Available kits
- 1.15kg: (1+0.15)kg
- 6.9kg: (6+0.9)kg
- 34.5kg: (30+4.5)kg
Storage & Handling
- Storage
- Keep containers sealed and away from heat and cold preferably between 10°C and 30°Cin a well ventilated area. Our products are guaranteed in their original packaging (check expiry date stated on the label).