Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Features
- SAW Tolerant
- SCAQMD VOC Compliant
- Early Water Resistance
- Surface: SSPC-SP2
- Widest Application Range (37F-120F)
- Certified To Both MPI#107 /MPI#79 Cross Compatibility
- Isolatek Fireproof Compatibility Certified
Applications & Uses
- Markets
- Application Method
- Mixing Instructions
Mix paint thoroughly to a uniform consistency with low speed power agitation prior to use.Do not let hydrocarbon solvents come in contact with this coating. For equipment and uid line cleaning use only an emulsifying industrial detergent followed by a water rinse.
- Application Methods
Conventional
- Fluid Pressure: 10 – 20 psi, Tip: .040”-.045"
- Atomization Pressure: 45-60 psi, Airless.
- Pressure: Adjust as needed Tip: .015” - .019”
HVLP
Brush, Roller or Dip
Specifications
- A Minimum of 1 DFT is required.
- Films of 1.5 – 2.0 DFT offer optimum corrosion protection.
- Reduce with a maximum of 5% water (Do Not Thin with Solvents)
Surface Preparation
Minimum SSPC-SP2
- Recommended Spread Rate per Coat
Minimum Maximum Wet mils (microns) 4.0 (100) 8.0 (200) Dry mils (microns) 2.0 (50) 4.0 (100) Coverage ft2/gal (m2/l) 200 (5) 400 (10)
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Finish | 5 - 10 | GU | — |
Components | 1.0 | — | — |
VOC | 25.0 | g/l | — |
Surface Temperature | 40 - 120 | °F | — |
Volume Solids | 36 - 40 | % | — |
Viscosity (Stormer) | 80 - 85 | KU | — |
Flashpoint (F) | min. 230 | °F | Close Cup |
Drying (2 MIL DFT , 77°F , 50% RH, Tack Free) | 8 | minutes | — |
Drying (2 MIL DFT , 77°F , 50% RH, To Touch) | 15 | minutes | — |
Drying (2 MIL DFT , 77°F , 50% RH, Tack Handle) | 20 | minutes | — |
Drying (6 MIL DFT , 77°F , 50% RH, To Recoat) | 30 | minutes | — |
Adhesion | 350.0 | psi | ASTM D4541 |
Condensation | 300.0 | — | ASTM D2247 |
Salt Fog | 329.0 | — | ASTM B117 |
Flammable | No | — | ASTM D93 |
Technical Details & Test Data
- Performance Characteristics
Performance Characteristics Result Scratch Resistance Method ASTM D336
H, No visible damage
Adhesion Method ASTM D4541
350 psi Flexibility Method ASTM D522 3/8”
180° bend passes
Packaging & Availability
- Packaging Type
- Packaging
275 Gal Totes, 55 Gal Drum and 5 Gal Pail
Storage & Handling
- Shelf Life
- 1 Year unopened