Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features
- Mud Crack From Sun Eliminated
- Outstanding Corossion Resistance
- Zero VOC/ Zero Haps
- Not Flammable
- No Hazardous Waste
- No Dip Tank Skinning
- Very Low Foam
- Clean Up with Water
- Nace SP0195-2007 Hydrocarbon Removal – Does Not Clog Pumps
Applications & Uses
- Markets
- Application Methods
Conventional
- Fluid Pressure: 10 – 20 psi , Tip: .040” - .045”
- Atomization Pressure: 45 – 60 psi Airless
- Pressure: Adjust as needed ,Tip: .015” - .019”, Brush, Roller or Dip.
Specifications
Films that offer optimum corrosion protection are 3 mils dry over rod profile. If profile is 3 mils then total coat thickeness is 6 DFT Reduce with water (Never thin with solvents)
Surface Preparation
Minimum SSPC-SP26 , NACE #1 , 31 GP 404 TYPE 1 , SA. 3 OR BS4232 First Quality
- Recommended Spread Rate per Coat
Minimum Maximum Wet mils (microns) 10(250) 15(200) Dry mils (microns) 4.0(100) 6.0(150) Coverage ft2/gal (m2/l) 160(4) 107(2.6) - Limitations
At ambient temperatures below 25°C paint lines must be lagged. In-line heaters should not be used unless absolutely necessary. For maximum performance the curing temperature should be kept below 35°C. Particular care should be taken to avoid exceeding this in localized areas when artificial heating is introduced. The climatic conditions within the tank must be controlled to maintain a maximum relative humidity of 90%. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Finish | 20 - 30 | GU | - |
Components | 1.0 | - | - |
VOC | max. 5 | g/l | - |
Surface Temperature | 40 - 120 | °F | - |
Volume Solids | 35 - 40 | % | - |
Viscosity (Stormer) | 55 - 60 | KU | - |
Flashpoint(F) | min. 230 | °F | Close Cup |
Drying (6 MIL DFT , 77°F , 50% RH, Tack Free) | 60 | minutes | |
Drying (6 MIL DFT , 77°F , 50% RH, Water Resistance) | 4 | Hours |
Technical Details & Test Data
- Performance Characteristics
Performance Characteristics Result UV Condensation Method ASTM D4587 168 HRS , No Cracking
Salt Fog Resistance Method ASTM B117 24 HRS , rating 10
Flexibility Method ASTM D522 3/8” 180° bend passes
Water Resistance Method ASTM D1308 Passed , no blistering
Packaging & Availability
- Packaging Type
- Packaging
5,000 Gal Bulk, 275 Gal Totes, 55 Gal Drum and 5 Gal Pail.
Storage & Handling
- Shelf Life
- 1 Year unopened