Safripol Safron

Safron® C142 - 01N is a polypropylene resin which is a nucleated high impact copolymer especially suited for twin walled sheet applications. Its good compressive strength combined with flexibility for easy stamping out of complex shapes, renders it useful for a wide variety of applications. It is also suitable for profile extrusion. Safron® C142-01N Polypropylene Resin can also be used for the injection molding of technical parts requiring exceptional toughness, especially at low temperatures.

Safron® C722 - 07NA is polypropylene resin which is a nucleated impact copolymer with high impact strength, good flow and a narrow molecular weight distribution (MWD). It is used for general purpose complex injection molding applications where toughness is required. The narrow MWD leads to a high dimensional stability in complicated articles. Safron® C722-07NA Polypropylene Resin contains an antistatic additive.

Safron® C740 - 25RNA polypropylene resin is a nucleated impact copolymer suitable for thin walled containers requiring impact performance. It is characterized by high impact properties and is produced using controlled rheology allowing for narrow molecular weight distribution (MWD). This imparts dimensional stability to molded parts. Safron® C740-25RNA Polypropylene Resin contains an antistatic additive.

Safron® C765 - 15NA polypropylene resin is a high performance impact copolymer developed for injection molding applications. It has an improved balance of mechanical properties with outstanding stiffness and high impact strength which is maintained even at low temperatures. Safron® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive.

Safron® C790 - 90RNA polypropylene resin is a high performance impact copolymer with a very high melt flow rate. Safron® C790-90RNA is designed for thin wall injection molding, especially multiple cavity molds with long flow paths and allows for easy processing, short cycle times and good dimensional stability. Safron® C790-90RNA Polypropylene Resin contains an antistatic additive.

Safron® H106 - 02NSA polypropylene resin is designed specifically for carbonated soft drinks closure applications. The material is highly nucleated offering fast cycle times and also contains slip and antistatic additives. It exhibits a combination of high stiffness and toughness properties, as well as outstanding processing characteristics. Safron® H106-02NSA Polypropylene Resin may also be used for select technical injection molding applications.

Safron® H504 - 12M polypropylene resin is recommended for the spinning of staple fiber in the range 2 – 25 denier. It is also used for the manufacture of Bulk Continuous Filament (BCF) yarns. Safron® H504-12M Polypropylene Resin is a medium to high flow injection molding grade for applications where rigidity and fast cycle times are essential.

Safron® H510 - 02 polypropylene resin is suitable for extrusion, general purpose injection and blow molding. It offers good processability and low water carry-over, as required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.

Safron® H511 - 03 polypropylene resin is developed for the production of slit film tapes. It offers excellent processability and low water carryover. Safron® H511-03 Polypropylene Resin is also suitable for the production of water quenched blown film and monofilaments.

Safron® H707 - 12NSM polypropylene resin is a medium to high flow homopolymer developed for injection molding. It is nucleated for applications requiring higher rigidity and allows for faster cycle times. Furthermore Safron® H707-12NSM Polypropylene Resin is formulated with a slip additive that allows for easy de-molding.

Safron® H713 - 06 polypropylene resin is developed for the production of slit film tapes where high extrusion speeds are required. It offers excellent processability and low water carry over. Safron® H713-06 is also suitable for general purpose injection molding applications.