Products

ASPIRE® T84 is a non-fast reheat PET copolymer resin. It is cobalt free and used in injection stretch blow molding for beverage, edible oils and cosmetic containers. Other applications include extruded sheet used for thermoformed food packaging containers as well as industrial strap extrusion.

Safron® H707 - 12NSM polypropylene resin is a medium to high flow homopolymer developed for injection molding. It is nucleated for applications requiring higher rigidity and allows for faster cycle times. Furthermore Safron® H707-12NSM Polypropylene Resin is formulated with a slip additive that allows for easy de-molding.

Safron® C740 - 25RNA polypropylene resin is a nucleated impact copolymer suitable for thin walled containers requiring impact performance. It is characterized by high impact properties and is produced using controlled rheology allowing for narrow molecular weight distribution (MWD). This imparts dimensional stability to molded parts. Safron® C740-25RNA Polypropylene Resin contains an antistatic additive.

Safrene® E 5560 High Density Polyethylene Resin is designed for compression molding applications. Having excellent mechanical strength, toughness, environmental stress-crack resistance and good processability, it is especially suitable for the production of carbonated soft drink closures.

ASPIRE® T80 is a non-fast reheat PET copolymer resin. It is cobalt free and used in injection stretch blow molding for still mineral water containers. Other applications include extruded sheet used for thermoformed food packaging containers as well as industrial strap extrusion.

Safron® C722 - 07NA is polypropylene resin which is a nucleated impact copolymer with high impact strength, good flow and a narrow molecular weight distribution (MWD). It is used for general purpose complex injection molding applications where toughness is required. The narrow MWD leads to a high dimensional stability in complicated articles. Safron® C722-07NA Polypropylene Resin contains an antistatic additive.

Safrene® C 7260 High Density Polyethylene Resin is an injection molding grade with high flow characteristics, good mechanical strength and high stiffness combined with low distortion tendency. It is especially suited for crates and industrial containers.

Advance 400® is a random copolymer developed for thin wall injection molding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures. Advance 400 ® Polypropylene Resin contains an antistatic additive.

Advance 150® PLUS is a clarified random copolymer designed for the injection or extrusion blow molding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150® PLUS exhibit optimum surface finish and excellent contact clarity.

Safron® H510 - 02 polypropylene resin is suitable for extrusion, general purpose injection and blow molding. It offers good processability and low water carry-over, as required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.

Safron® C765 - 15NA polypropylene resin is a high performance impact copolymer developed for injection molding applications. It has an improved balance of mechanical properties with outstanding stiffness and high impact strength which is maintained even at low temperatures. Safron® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive.

Safron® H713 - 06 polypropylene resin is developed for the production of slit film tapes where high extrusion speeds are required. It offers excellent processability and low water carry over. Safron® H713-06 is also suitable for general purpose injection molding applications.

Safron® C790 - 90RNA polypropylene resin is a high performance impact copolymer with a very high melt flow rate. Safron® C790-90RNA is designed for thin wall injection molding, especially multiple cavity molds with long flow paths and allows for easy processing, short cycle times and good dimensional stability. Safron® C790-90RNA Polypropylene Resin contains an antistatic additive.

Safrene® M 7650 High Density Polyethylene Resin is a bimodal high molecular weight grade suitable for extrusion blow molding of containers greater than 20 liters in volume. It has high rigidity and hardness with very good impact strength and excellent environmental stress-crack resistance properties. Safrene® M 7650 High Density Polyethylene Resin is primarily designed for the blow molding of large hollow articles but may be used for smaller moldings where exceptional environmental stress-crack resistance and impact strength are required.

Safrene® H 4765 High Density Polyethylene Resin is a bimodal medium molecular weight blow molding grade with good processing properties. It is recommended for small part blow molding applications up to 20 liters in volume where good impact, excellent stiffness and environmental stress-crack resistance are required.

Advance 150® is a clarified random copolymer designed for the blow molding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150 ® exhibit good surface finish and excellent contact clarity. Advance 150 ® also contains a UV absorber for improved light stability.

ASPIRE® 84J is a fast reheat, high viscosity PET copolymer resin. The resin is characterized by its improved processability and exceptional stability allowing for optimum productivity. ASPIRE® 84 J is suitable for Carbonated Soft Drink (CSD) bottles and other injection stretch blow molded containers. It is also used in sheet extrusion for thermoformed food packaging.

Safron® H106 - 02NSA polypropylene resin is designed specifically for carbonated soft drinks closure applications. The material is highly nucleated offering fast cycle times and also contains slip and antistatic additives. It exhibits a combination of high stiffness and toughness properties, as well as outstanding processing characteristics. Safron® H106-02NSA Polypropylene Resin may also be used for select technical injection molding applications.

Safrene® F 7650 High Density Polyethylene Resin is a bimodal medium molecular weight blow molding grade with good processing properties. It exhibits good impact strength and excellent environmental stresscrack resistance. Safrene® F 7650 High Density Polyethylene Resin is recommended for general purpose applications up to 20 liter in volume.

Safrene® D 7255 High Density Polyethylene Resin is suitable for injection and compression molding applications. Having excellent mechanical strength and toughness, as well as good environmental stress crack resistance, it is especially suitable for durable, thick-walled containers.