Products

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

ACLUBE V-4000 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

ACLUBE V-3030 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-3030 with mineral oils.

NEWPOL 50HB-100 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-1715 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-85 is used for fluidic cosmetics.

NEWPOL LB-300X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 75H-90000 is polyalkylene glycol-type lubricant used for lithium soap grease as well as high temperature grease compounded with graphite or molybdenum sulfide. It is soluble in water.

SANHIBITOR 150 is an oil-soluble rust inhibitor. It imparts excellent rust preventive properties to lubricants such as turbine oils, and fuel oils when used in small amounts.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-20C is used for fluidic cosmetics.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments.

NEWPOL LB-65 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-60V is used for nonfluidic cosmetics.

ACLUBE V-2041 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties.

ACLUBE P-D3000 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high dispersibility.

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

ACLUBE P-2090 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

ACLUBE P-2100 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

ACLUBE P-4080 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-4080 with mineral oils.

ACLUBE P-2320 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-2320 with mineral oils.

ACLUBE V-1001 is viscosity index improvers, suitable for ATF, CVTF, gear oils and hydraulic fluids. They exhibit high shear stability, viscosity index improvement and low-temperature viscosity properties.

ACLUBE V-3020 is a viscosity index improver, suitable for ATF, gear oils and hydraulic fluids. It exhibits high thickening and low-temperature viscosity properties.

ACLUBE V-4020 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

SANHIBITOR No.2-1 is a water-soluble and oil-soluble rust inhibitor. It has excellent rust-preventive properties on both ferrous and non-ferrous metals. It produces less foam. The recommended concentration: 0.2–0.5 wt %.

ACLUBE V-5000 is a viscosity index improver, suitable for engine oils and hydraulic fluids. It exhibits high thickening and low-temperature viscosity properties.

ACLUBE V-1050 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1050 with mineral oils.

NEWPOL LB-285 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-385 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-3000 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

ACLUBE V-2000 is a viscosity index improver, suitable for gear oils, ATF, CVTF and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties for base oils.

ACLUBE V-5040 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

NEWPOL LB-625 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

ACLUBE V-1040 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability.

SANHIBITOR 102 is an oil-soluble rust inhibitor, suitable for turbine oils. Also, it is applicable for lubricants. It has excellent demulsifying properties.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-80 is used for fluidic cosmetics.

ACLUBE V-1060 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1060 with mineral oils.