Products

SANHIBITOR No.50 is a water-soluble rust inhibitor. It produces less foam and is easily rinsed. It has excellent rust preventive properties and is resistant to heat and alkaline solutions. It is substitutable for alkanol amine. The recommended concentration: 0.2–0.5 wt %.

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

SANMODUR TW-E is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 95°C maintaining other performance of conventional product.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONETS products, to produce creamy cosmetics and creamy ointments. IONET T-80V is used for fluidic cosmetics. IONET T-80V is solubilizing agents for perfumes, refined oils and fats of various kinds.

ACLUBE V-4000 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PP-3000 is polypropylene glycols derived from propylene oxide. Each of the product numbers that are written next to NEWPOL PP as product names indicates its approx. Number-average molecular weight. NEWPOL PP-3000 is mainly used as raw materials for pharmaceuticals, surfactants, synthetic lubricating oils, and as mold release agents for rubber.

NEWPOL PE-61 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

ACLUBE V-3030 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-3030 with mineral oils.

NEWPOL 50HB-100 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-1715 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-85 is used for fluidic cosmetics.

NEWPOL PE-62 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL LB-300X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 75H-90000 is polyalkylene glycol-type lubricant used for lithium soap grease as well as high temperature grease compounded with graphite or molybdenum sulfide. It is soluble in water.

IONET S-80S has excellent rust preventive, lubricating and emulsifying properties. They are effective as additives for rust preventive oils and metal working oils.

NEWPOL 50HB-5100 is suitable for application to automotive radiator hose, household rubber hose, etc. It is used in aqueous solution.

NEWPOL PP-4000 is polypropylene glycols derived from propylene oxide. Each of the product numbers that are written next to NEWPOL PP as product names indicates its approx. Number-average molecular weight. NEWPOL PP-4000 is mainly used as raw materials for pharmaceuticals, surfactants, synthetic lubricating oils, and as mold release agents for rubber.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

SANMODUR MH-5E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

NEWPOL LB-65 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments.

SANMODUR MAX-M is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 88°C maintaining other performance of conventional product.

SANHIBITOR 150 is an oil-soluble rust inhibitor. It imparts excellent rust preventive properties to lubricants such as turbine oils, and fuel oils when used in small amounts.

NEWPOL PE-34 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-60V is used for nonfluidic cosmetics.

SANMODUR MH-15E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-20C is used for fluidic cosmetics.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-60V is used for nonfluidic cosmetics.

ACLUBE V-2041 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties.

NEWPOL 50HB-55 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

ACLUBE P-2320 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-2320 with mineral oils.

NEWPOL PP-2000 is polypropylene glycols derived from propylene oxide. Each of the product numbers that are written next to NEWPOL PP as product names indicates its approx. Number-average molecular weight. NEWPOL PP-2000 is mainly used as raw materials for pharmaceuticals, surfactants, synthetic lubricating oils, and as mold release agents for rubber.

ACLUBE P-4080 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-4080 with mineral oils.

NEWPOL PP-1000 is polypropylene glycols derived from propylene oxide. Each of the product numbers that are written next to NEWPOL PP as product names indicates its approx. Number-average molecular weight. NEWPOL PP-1000 is mainly used as raw materials for pharmaceuticals, surfactants, synthetic lubricating oils, and as mold release agents for rubber.

ACLUBE P-2100 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.