Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Colouring
It can be colored with 2 to 4% PVC compatible master batches without affecting end product properties.
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Processing Techniques
FX 9 UV can be processed on any good PVC extruder with a temperature range of 140ºC - 185ºC and Pre-heating the same up to 70ºC is recommended to avoid moisture bubbles on end products.
- Spillage
Vacuum cleaning.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.52 | — | ASTM D 729 |
| Hardness | 91 | Shore A | ASTM D 2240 |
| Tensile Strength (Before Aging) | 15.5 | N/mm² | IS 10810 Part 7 |
| Elongation at Break (Before Aging) | 240 | % | IS 10810 Part 7 |
| Tensile Strength (After Aging, 78ºC - 82ºC, 7 Days) | 16.43 | N/mm² | IS 10810 Part 11 |
| Elongation at Break (After Aging, 78ºC - 82ºC, 7 Days) | 223 | % | IS 10810 Part 11 |
| Thermal Stability (199.5ºC - 200.5ºC) | min. 80 | minutes | IS 10810 Part 60 |
| Loss of Mass (After Aging, 78ºC - 82ºC, 7 Days) | 1.2 | mg/cm² | IS 10810 Part 10 |
| Heat Shrinkage (148ºC - 152ºC, 15min) | 2.5 | % | IS 10810 Part 12 |
| Oxygen Index | 30.8 | % | ASTM D 2863 |
| Temperature Index | 285 | ºC | ASTM D 2863 |
| Smoke Density Rating | 58.5 | % | ASTM D 2843 |
| HCL Emission | 16 | % | IEC - 754 |
| Variation in Elongation (After Aging, 78ºC - 82ºC, 7 Days) | -7 | % | IS 10810 Part 11 |
| Variation in Tensile Strength (After Aging, 78ºC - 82ºC, 7 Days) | 6 | % | IS 10810 Part 11 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Safety
These PVC pellets do not undergo hazardous decomposition under normal storage conditions. Static charges may be generated by conveying PVC pellets and, therefore, the conveying systems should be properly grounded.
Packaging & Availability
- Packaging Type
Storage & Handling
- Package Storage & Handling
These PVC pellets should be packed in airtight laminated plastic bags of 25 Kg net weight and stored in a cool & dry place away from sunlight. Use of gloves and nose mask is recommended during manual handling.
- Disposal
Waste PVC pellets should be disposed in accordance with local regulations. The product is intended for industrial use only MSDS is available on request.