Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Colouring
It can be colored with 2 to 4% Non-Lead PVC compatible masterbatches without affecting end product properties.
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Processing Techniques
SP 00300 02 IS NL can be processed on any good PVC extruder with a temperature range of 140ºC - 180ºC and preheating the same up to 70ºC is recommended to avoid moisture bubbles on end products.
- Spillage
Vacuum cleaning.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.44 | - | ASTM D 729 |
| Hardness | 91 | Shore A | ASTM D 2240 |
| Tensile Strength (Before Aging) | 17 | N/mm² | IS 10810 Part 7 |
| Elongation at Break (Before Aging) | 250 | % | IS 10810 Part 7 |
| Tensile Strength (After Aging, 78ºC - 82ºC, 7 Days) | 18 | N/mm² | IS 10810 Part 11 |
| Elongation at Break (After Aging, 78ºC - 82ºC, 7 Days) | 230 | % | IS 10810 Part 11 |
| Thermal Stability (199.5ºC - 200.5ºC) | min. 80 | minutes | IS 10810 Part 60 |
| Loss of Mass (After Aging, 78ºC - 82ºC, 7 Days) | 1 | mg/cm² | IS 10810 Part 10 |
| Heat Shrinkage (148ºC - 152ºC, 15min) | 1.5 | % | IS 10810 Part 12 |
| Volume Resistivity (27ºC) | min. 4x10¹³ | Ohm.cm | IS 10810 Part 43 |
| Volume Resistivity (70ºC) | min. 5x10¹⁰ | Ohm.cm | IS 10810 Part 43 |
| Variation in Elongation (After Aging, 78ºC - 82ºC, 7 Days) | -8 | % | IS 10810 Part 11 |
| Variation in Tensile Strength (After Aging, 78ºC - 82ºC, 7 Days) | 5.9 | % | IS 10810 Part 11 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Safety
SP 00300 02 IS NL does not undergo hazardous decomposition under normal storage conditions. Static charges may be generated by conveying PVC pellets &, therefore, the conveying systems should be properly grounded.
Packaging & Availability
- Packaging Type
- Package Storage & Handling
SP 00300 02 IS NL pellets should be packed in airtight laminated plastic bags of 25 Kg net weight and stored in a cool & dry place away from sunlight. Use of gloves and nose mask is recommended during manual handling
Storage & Handling
- Disposal
Waste PVC pellets should be disposed in accordance with local regulations. The product is intended for industrial use only MSDS is available on request.