Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Characteristics
* High melting and softening point
* Low viscosity
* Excellent heat resistance and
thermal stability
* Very high hardness level
* Excellent chemical resistance
* Excellent compatibility with other waxes
* Excellent lubrication
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Typical Application
* Hot melt adhesive
* PVC compound
* Color masterbatch
* Thermoplastic road marking
* Plastic additive
* Petroleum wax blend
* Rubber
* Cable filling compound
* Micronized wax- Processing Guidelines
The recommended melt temperature is 130 - 150 °C. It is recommended to use mixing machine giving good homogenization. The recommend dosage depends on the intended applications which are shown below:
- Applications:
Hot melt adhesive
PVC compound
Color masterbatch
Thermoplastic road
marking
Plastic additive
Petroleum wax blend
Rubber
Cable filling compound
Micronized waxRecommendation:
20 - 30% is recommended to reduce viscosity and adjust setting time of polyolefins, EVA base.
0.5 - 1.5 phr is recommended to be external lubricant for rigid PVC.
5 - 30% is recommended to improve pigment dispersion in polyolefins bases.
1-3%is recommended to reduce viscosity for hydrocarbon resin base.
5 - 8% is recommended to improve filler dispersion in polyolefins bases.
3 - 5% is recommended to add into a paraffin wax to increase softening point and hardness.
2 - 10% is recommended to improve processability and additives dispersion.
5-10 phr is recommended to improve moisture barrier property.
It can be used for grinding or spraying process as a single material or blended with other chemicals such as PTFEProduct Technical Assistance
For technical assistance or further information on this product or any other SCG Chemicals' products contact your
SCG Chemicals technical service at the address or telephone number as specified below.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity at 149°C | 10-40 | cps | ASTM 03236 |
| Density | 0.95 | g/cm3 | ASTM D1505 |
| Penetration Hardness | 1 | dmm | ASTM D1321 |
| Dropping Point | 118 | °C | ASTM D3954 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- International Compliance
* US FDA 21 CFR 175.105
* US FDA 21 CFR 178.3720
* Directive 2002/95/EC (RoHS) and
Directive 2011/65/EU (ROHS Recast)
* Regulation (EC) No.1907/2006 (REACH)
* Directive 94/62/EC (Packaging and Packaging Waste).
Safety & Health
- Safety
* The product is not classified as a hazardous material.
* Please see our Material Safety Data Sheet for details on various aspects of safety, recovery, and disposal of the products; for more information, contact your SCG Plastics/SCG Performance Chemicals technical service.
Packaging & Availability
- Packaging Type
- Product Packaging
- 20 kg loose bag
- 20 kg bag on pallet (pelletizedwrap)
- Recycling
* The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
* Please see our Material Safety Datasheet for details on various aspects of safety, recovery and disposal of the products; for more information, contact your SCG Plastics/SCG Performance Chemicals technical service.
Storage & Handling
- Storage
* Store in original container in tidy according to the manual of Handling and Storage from Thai Polyethylene Company Limited/ Thai Polypropylene Company Limited.
* Product(s) should be stored in dry and dust free location at temperature below 50°C and protected from direct sunlight and/or heat, well-ventilated area, away from incompatible materials and food and drink, as thismay lead to quality deterioration, which results in odor generation and color changes and can have negative effects on the physical properties of this product.
* Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.
* The storage area should be stable and not be slopped.