Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Product Characteristics
* Compatibility with polyolefins
* Excellent pigment wettability
* Excellent lubrication
* Excellent chemical resistance
* Good heat resistance and thermal stability
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Adhesive & Sealant Type
- Plastics & Elastomers End Uses
- Typical Application
* Hot melt adhesive
* PVC compound
* Color masterbatch
* Rubber- Processing Guidelines
The recommended melt temperature is 130 - 150 °C. It is recommended to use mixing machine giving good
homogenization.
Applications Function
Hot melt adhesive Viscosity reduction and heat resistance improvement
PVC compound Excellent lubrication
Color masterbatch Dispersing agent
Rubber Viscosity reduction and lubricant
Product Technical Assistance
For technical assistance or further information on this product or any other SCG Chemicals' products contact
your SCG Chemicals technical service at the address or telephone number as specified below.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity at 140°C | 350-450 | cps | ASTM 03236 |
| Density | 0.92 | g/cm3 | ASTM D1505 |
| Penetration Hardness | 2 | dmm | ASTM D1321 |
| Dropping Point | 109 | °C | ASTM D3954 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- International Compliance
* US FDA 21 CFR 175.105
* US FDA 21 CFR 178.3720
* Directive 2002/95/EC (RoHS) and
Directive 2011/65/EU (RoHS Recast)
* Regulation (EC) No.1907/2006 (REACH)
* Directive 94/62/EC (Packaging and Packaging Waste)
* EN71 Part3: 2013 European Standard on Safety of Toys
Safety & Health
- Safety
* The product is not classified as a hazardous material.
Packaging & Availability
- Packaging Type
- Product Packaging
- 20 kg loose bag
- 20 kg bag on pallet (pelletized wrap)
- Recycling
- The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
Storage & Handling
- Storage
* Store in original container in tidy according to the manual of Handling and Storage from Thai Polyethylene Company Limited/ Thai Polypropylene Company Limited.
* Product(s) should be stored in dry and dust free location at temperature below 50°C and protected from direct sunlight and/or heat, well-ventilated area, away from incompatible materials and food and drink, as this may lead to quality deterioration, which results in odor generation and color changes and can have negative effects on the physical properties of this product.
* Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.
* The storage area should be stable and not be slopped.