Products

PPS-SG405E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

PPS-SG401R87 PPS is a 40% advanced glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance

PPS-SG401R63 PPS is a 40% glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance

PPS-SG403E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

PPS-SGM601E65 PPS is a 60% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide high modulus, low warp, excellent mechanical and electrical performance.

AS-SG401A63 is a glass fiber reinforced by PPS bassed PA66 aloy to provide excellent mechanical strength,toughness,and rigidity,along with excellent flow in thin-walled parts,low flash characteristics,and fast cycle times.It may be easily molded in conventional injection molding equipment utilizing water heated molds

PPS-SG455E43 PPS is a 45% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

PPS-SG503E65 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

PPS-SGM653E65 PPS is a 65% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide high modulus, low warp, good mechanical and electrical performance.

PPS-SGC301S87 PPS is a 30% carbon fiber reinforced linear polyphenylene sulfide compound, developed to provide low wear and excellent processability

PPS-SGC301STF PPS is a 30% carbon fiber reinforced linear polyphenylene sulfide compound, developed to provide excellent engineering properties and processability

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

ES-SG301E41 is a 30% glass fiber reinforced PPS&PTFE compound specially formulated to have a low coefficient of friction for use in low surface friction and cost-effective for clients

PPS-SG505E45 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

PPS-SG401A87-02 is a 40% glass fiber reinforced linear polyphenylene sulfide compound, that is specially formulated to enhanced hydrolytic stability in applications requiring constant or repeated exposure to high temperature water

ES-SG301E43 is a 30% glass fiber reinforced PPS&PTFE compound specially formulated to have a low coefficient of friction for use in low surface friction and wear applications,specially lower wear performence

ES-SGC101S21 is a 10% carbon fiber reinforced PPS&PTFE compound specially formulated to have a low coefficient of friction for use in low surface friction and wear applications,specially lower wear performence

PPS-SG401A87-03 is a 40% glass fiber reinforced linear polyphenylene sulfide compound, that is specially formulated to to provide high strength,fast cycles,and low maintenance molding using conventional molding equipment

PPS-SG453E65 PPS is a 45% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

PPS-SGM651E65 PPS is a 65% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide high modulus, low warp, excellent mechanical and electrical performance.

PPS-SGM651E43 PPS is a 65% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide high modulus, low warp, good mechanical and electrical performance.

PPS-SG501T87 PPS is a 50% glass fiber reinforced linear polyphenylene sulfide compound developed to provide excellent engineering properties and processability

PPS-SGL451T65 PPS is a 45% special glass fiber reinforced low chlorine polyphenylene sulfide compound, its CL content is in 900PPM below, mainly used in the field of halogen content requirements.

ES-SG401E65 is a 40% fiberglass reinforced PPS&PTFE compound specially formulated to have a low coefficient of friction for use in low surface friction and wear applications.

PPS-SGM605E43 PPS is a 60% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide high modulus, low warp, good mechanical and electrical performance and low cost.

PPS-SG401A87-01 is a 40% glass fiber reinforced linear polyphenylene sulfide compound, that is specially formulated to provide high flow in thin-walled parts and excellent processability

PPS-SGL401A87 PPS is a 40% special glass fiber reinforced low chlorine polyphenylene sulfide compound, its CL content is in 900PPM below, mainly used in the field of halogen content requirements.

PPS-SG201E2L is a 20% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,chemical resistance and excellent processability

PPS-SGM505E43 PPS is a 50% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties.

PPS-SGM555E43 PPS is a 55% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide low cost and good engineering properties.

PPS-SGM655E43 PPS is a 65% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide high modulus, low warp, good mechanical and electrical performance and low cost.

PPS-SG301R63 PPS is a 30% glass fiber reinforced linear PPS based elastomer aloy that is specially formulated to provide improved ductility and impact strength

AS-SG401T87 is a glass fiber reinforced by PPS bassed PA66 aloy to provide excellent mechanical strength,toughness,and rigidity,along with excellent flow in thin-walled parts,low flash characteristics,and fast cycle times.It may be easily molded in conventional injection molding equipment utilizing water heated molds

PPS-SGM501T65 PPS is a 50% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide good engineering properties

PPS-SG501R65 PPS is a 50% advanced glass fiber reinforced linear polyphenylene sulfide and elastomer, both with PPS high rigidity, high heat resistance, corrosion resistance and other excellent properties and has a good impact resistance