Products

SCIGRIP® SG200-40 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics1 , metals2 and combinations thereof. Minimal surface preparation1, 2 combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. These products are widely used for marine, transportation and general plastic bonding applications. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG200-20 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics1 , metals2 and combinations thereof. Minimal surface preparation1, 2 combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. These products are widely used for marine, transportation and general plastic bonding applications. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG230HV is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation1,2. The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

SCIGRIP® SG7706 B is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

SCIGRIP® SG200-10 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics1 , metals2 and combinations thereof. Minimal surface preparation1, 2 combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. These products are widely used for marine, transportation and general plastic bonding applications. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

SCIGRIP® SG7706 is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.