Products

AQUARYL PRIMO is a pigmented print based on acrylic resin in aqueous phase.

AQUARYL UNDERCOAT is a special impression for droplet based on acrylic resin in aqueous phase. Which is a good opacifying power and special printing before projection of droplet coating.

AQUARYL IMPRESS+ is a Opacifying impression based on acrylic resin in aqueous phase. Which is good filling power, good glide, VOC< 1g/L. Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints in good condition. Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.). In general, after preparation, the substrates must be healthy, cohesive, clean and dry to receive a coat of AQUARYL IMPRESS+.