Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Classification
AFNOR NF T 36-005 Family I Class 7b2
Features & Benefits
- Features
- Special printing before projection of droplet coating.
- Good opacifying power.
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Applications
Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints, before spraying a droplet coating.
- Application Characteristics
- Conditions Application: Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%.
- Application Material: Airless, nozzle from 15 to 17
- Brush: mixed
- Sleeve: wicking polyamide continuous thread 12mm
- Dilution: Ready to use, up to 5 % water.
- Equipment Cleaning: With water immediately after use
- Implementation
Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding,
scraping, degreasing, roughening, dusting, etc.).In general, after preparation, the supports must be healthy, cohesive, clean, dry to receive a layer of
AQUARYL UNDERCOAT.
On old adhering paints: preparation of the support, in particular by degreasing with DEGRAISSANT LT 615, followed by rinsing with water, drying and roughening of the glossy paints, then application of a coat of AQUARYL SOUS COUCHE before spraying a droplet coating. On interior supports such as: - Plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings: preparation of the support then application of a layer of AQUARYL SOUS-COUCHE before spraying a droplet coating.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Dry Extract | 64.0 | % | - |
Density | 1.61 | - | - |
Yield | 8 - 10 | m2/L | - |
VOC of this product | 30.0 | g/L | - |
VOC limit value | max. 18 | g/L | - |
Regulatory & Compliance
- Areas of Application
Category A / Subcategory g (according to directive 2004/42/EC)
Technical Details & Test Data
- Technical Characteristics
- Binders: Waterborne acrylic
- Movie look: Matte, poached
- Specular Brilliants: less than 3% at 60° angle, less than 4% at 85° angle
- Shades: White and pastel shades, i.e. more than 45,000 shades (Series A)
- Dust free: 30min
- Dry: 1 hour
- Sandable: 2h
- Recoverable: 6h
Packaging & Availability
- Areas of Application
Conditioning: 16L
Storage & Handling
- Storage
Storage before opening: 12 months in the original sealed container, protected from frost and high temperatures >35°. Storage after opening: Close the container well after opening in order to preserve the characteristics of the product.