Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Finish/Sheen
- Gloss
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Heavy Duty Protection in Fresh or Saltwater
- Aluminum and steel hull protection
- Excellent water barrier for dock and pier pilings made of wood or concrete
- Features & Benefits
- Extremely High Build Epoxy for Maximum Protection
- Part of the Sea Hawk Aluminum Barrier Coat System Preferred by Mega Yachts
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Details
- Film Thickness: 12 mils (304.8 μ) wet film thickness equals 8 mils (203.2 μ) dry film thickness per coat; can be applied at 20-30 mils (508-762 μ) wet film thickness to obtain 14-20 mils (355.6-508 μ) dry when applied with airless sprayer
- Recommended Coats: 1-2
- Theoretical Coverage: 140 sq.ft./gal. @ recommended film thickness
- Converter: 1:1 - 1255A & 1255B
- Mix Ratio: 4:1
- Method: Brush, roller or spray
- Induction Time: 5-10 minutes
- Thinner: Sea Hawk 2031
- Cleaner: Sea Hawk 2031
Pot Life:
@50-60° F (10-15.5° C)
4-6 Hours
@60-80° F (15.5-26.6° C)
2-4 Hours
@80-100° F (26.6-38° C)
1-2 Hours Overcoating Intervals (Drying time in hours):
Substrate Temp.
Touch Dry
Minimum
Maximum
Minimum Launch
73° F (23° C)
2 hrs
1 hr
Not Critical
12 hrs
95° F (35° C)
1 hrs
1 hr
Not Critical
12 hrs Consult your Sea Hawk Representative for the system best suited for surfaces to be protected.
- Surface Preparation
Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material using Sea Hawk S-80, S-90, or detergent washing. (SSPC-SPI).
New Construction: Dependent on yard procedures, consult your Sea Hawk Representative.
- Application
Apply by brush, roller or spray. Application by brush or roller my require more than one coat. Where two coats are required, apply second coat as soon as first coat is firm. Maximum recoat time is 18 hours. If 1255 cures beyond the recoat time uniformly abrade surface to a dull golden brown by brush blasting under low pressure, or sanding with 80 grit sandpaper.
- Equipment
- Brush: China Bristle
- Roller: Solvent Resistant Roller Cover 3/8” (10 mm) pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use.
- Airless Spray: Minimum 45:1 ratio pump, 1–2 GPM; 0.021”-0.031” (0.53-0.78 mm) orifice tip; 3/8” (10 mm) ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.
- Thinning: Not to exceed 1 quart to 5 gallons using Sea Hawk 2031.
- Cleaning: Clean all equipment immediately after use with Sea Hawk 2031. It is a good practice to periodically flush out spray equipment during the course of the day. Frequency should depend upon amount sprayed, temperature, elapsed time including delay, etc.
- Safety: Prior to use, obtain and consult the “Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels.
- Limitations
Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 5°F (1°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38°C). Prolonged atmospheric exposure of this product may detract from performance.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Volume Solids | 85.0 | % | — |
Mix Ratio | 4:1 | — | — |
Flash Point | 110.0 | °F | — |
VOC | 170.0 | Grams/Liter | — |
Packaging & Availability
- Shipping Weight
57 Lbs. (25.8 kg) including catalyst