Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Finish/Sheen
- Flat
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Excellent Moisture Barrier
- Great for use over any existing
- Bottom paint
- Anti-corrosive properties
- Adhesion promoter
- No overcoat window
- Features & Benefits
- Compatible Over Existing Antifoulants
- No Other Comparable Product on the Market
- No Overcoat Window
- Best Adhesion Promoter in the industry
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Details
- Converter: One Pack
- Mix Ratio: One Pack
- Film Thickness: 2 mils (50.8 μ) wet film thickness
- Recommended Coats: 1
- Theoretical Coverage: 802 sq.ft./gal. (74.5 m2) @ recommended film thickness
- Method: Brush, roller or spray
- Induction Time: Not applicable
- Thinner: Sea Hawk 2044
- Cleaner: Sea Hawk 2044
- Pot Life: Not applicable
Overcoating Intervals:
Substrate Temp. Touch Dry Overcoating Time
Launch Temp F˚ (C˚) Min Min Max Min 73° F (23°C) 2 hrs 1 hr N/A 12 hrs May be overcoated as little as 2 hours depending on atmospheric conditions: a recommended overnight dry before applying antifoulant.
Consult your Sea Hawk Representative for the system best suited for surfaces to be protected.- Application
- Apply by brush, roller or spray. Apply 6 mils wet, which will yield 2 mils dry per coat.
- Airless Spray: Minimum 30:1 ratio pump; 1 GPM 0.013”-0.023” (0.33-0.58 mm) orifice tip; 1/4” (6.35 mm) ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.
- Thinning: If thinning is necessary, thin up to a maximum of 10%, with Sea Hawk 2044.
- Cleaning: Clean all equipment immediately after use with Sea Hawk 2031. It is a good practice to periodically flush out spray equipment during the course of the day. Frequency should depend upon amount sprayed, temperature, elapsed time including delay, etc.
- Safety: Prior to use, obtain and consult the “Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary
- Surface Preparation
Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material using SeaHawk S-80, S-90, or detergent washing. (SSPC-SPI).
New Construction: Dependent on yard procedures, consult your Sea Hawk Representative.
- Equipment
- Brush: China Bristle
- Roller: Solvent Resistant Roller Cover 3/8” (10 mm) pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use.
- Limitations
Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 5°F (1°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38°C). Prolonged atmospheric exposure of this product may detract from performance.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Volume Solids | 29 - 33 | % | — |
| Flash Point | 80.0 | °F | — |
| VOC | 594.0 | Grams/Liter | — |
Packaging & Availability
- Shipping Weight
10.29 lbs./gal. (4.66 kg/Gal)