Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application
- SenSyn 46170 is intended for use in severe duty applications, extreme environment and where extended time periods between operation is required such as tank and howitzer recoil mechanism and hydraulic systems, snow removal, earth moving and heavy duty construction equipment, and industrial robotic hydraulic systems.
- SenSyn 46170 is especially recommended in applications where rust protection together with high flash points can afford an extra margin of safety and fire protection.
- SenSyn 46170 should not be used in aviation hydraulic systems without prior evaluation and should not be used in systems in contact with natural rubbers. Intermixing petroleum base stocks with SenSyn 46170 will reduce fire resistant properties.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point | 425 - 434 | °F | - |
| Fire Point | 475 - 483 | °F | - |
| Pour Point | - 65 to - 75 | °F | - |
| Autoignition Temperature | 664 - 650 | °F | - |
| Kinematic Viscosity (100°C) | 3.4 - 3.71 | cSt | - |
| Kinematic Viscosity (40°C) | 15.38 - 19.5 | cSt | - |
| Kinematic Viscosity (40°C) | 2303 - 2600 | cSt | - |
| Kinematic Viscosity (- 54°C) | 15500.0 | cSt | - |
| Specific Gravity (15.6°C) | 0.8623 - 0.8630 | - | - |
| Total Acid Number | 0.12 - 0.20 | meq KOH | - |
| Gravimetric Filtration | 0.02 - 0.5. | mg | - |
| Trace Sediment | 0.002 - 0.005 | ml | - |
| Water Content | 0.01 - 0.05 | % wt | - |
| Water Sensitivity | 90 - 98 | % | - |
| Evaporation Loss (300°F/22 hrs) | 2.5 - 5 | % | - |
| Synthetic Rubber Swell (158°F/168 hrs) | 15.0 - 25.0 | % | - |
| Shell 4 - Ball Wear (Scar 10 kg/1200 rpm/1 hr/75°C) | 0.25 - 0.3 | mm² | - |
| Shell 4 - Ball Wear (Scar 40 kg/1200 rpm/1 hr/75°C) | 0.35 - 0.65 | mm² | - |
| Solid Particle Contamination (Auto HIAC, 5 - 25) | 2200 - 10,000 | /100mL | - |
| Solid Particle Contamination (Auto HIAC, 26 - 50) | 40 - 250 | /100mL | - |
| Solid Particle Contamination (Auto HIAC, 51 - 100) | 10 - 50 | /100mL | - |
| Solid Particle Contamination (Auto HIAC, 100+) | 0 - 10 | /100mL | - |
| Foam Characteristics (5min. blow/ml at 10 min Sequence I) | 20/0 - 65/0 | ml | - |
| Foam Characteristics (5min. blow/ml at 10 min Sequence II) | 10/0 - 65/0 | ml | - |
| Foam Characteristics (5min. blow/ml at 10 min Sequence III) | 10/0 - 65/0 | ml | - |
Regulatory & Compliance
- Quality Standards