Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
- SuperClean Product
- Excellent Low Temperature Fluidity
- Wide Operating Temperature Range
- Excellent Oxidation and Corrosion Inhibition
- Outstanding Antiwear Performance
- Dyed red for easy identification and leak detection purposes.
Applications & Uses
- Applications
- Application Area
- Application
SenSyn 7566 is designed for use in aircraft and missiles hydraulic systems, shock absorbers, boom trucks, robotics and auto wreckers which require a high quality all weather performance fluid. It can also be used in hydraulic systems requiring non-zinc type hydraulic fluids in low temperature applications.
Special Instruction : Do not use product in system using natural rubber elastomers.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Kinematic Viscosity (40°C) | 13.2 - 14.27. | cSt | — |
| Kinematic Viscosity (40°C) | 493.84 - 600 | cSt | — |
| Kinematic Viscosity (100°C) | 4.90 - 5.18 | cSt | — |
| Kinematic Viscosity (- 54°C) | 1180 - 2500 | cSt | — |
| Pour Point | max. - 60 | °C | D - 97 |
| Copper Strip Corrosion (135°C for 72 hrs) | 2b - 2e | — | ASTM D - 130 |
| Water Content Karl Fischer | 90 - 100 | ppm | D - 1744 |
| Foaming Characteristics (24°C, Sequence I Initial) | 40 - 65 | ml | D - 892 |
| Foaming Characteristics (24°C, Sequence I Final after 10 min) | Complete | — | — |
| Insoluble Contamination | 0.2 - 0.3 | mg/100 ml | D - 4898 |
| Filtration Time (25°C) | 8 - 15 | Minutes | FTM 3009 |
| Solid Particle Contamination (5 to 15 micrometers) | 1440 - 10,000 | — | FTM 3009 (HIAC) |
| Solid Particle Contamination (16 to 25 micrometers) | 80 - 1,000 | — | FTM 3009 (HIAC) |
| Solid Particle Contamination (26 to 50 micrometers) | 0 - 156 | — | FTM 3009 (HIAC) |
| Solid Particle Contamination (51 to 100 micrometers) | 0 - 20 | — | — |
| Solid Particle Contamination (Over 100 micrometers) | 0 - 5 | — | — |
| Evaporation Loss (6 hrs, 71°C) | 15.2 - 20 . | — | D - 972 |
| Flash Point | 180 - 215.6 | °F | D - 93 |
| Acid Number | 0.05 - 0.20 | mg/KOH/g | D - 664 |
| Steel - On - Steel Wear, Scar Diameter | 0.57 - 1.0 | mm | D - 4172 |
| Rubber Swell (NBR - L) | 19 - 30 | % | FTM - 3603 |
| Low Temperature Stability (No gelling, Crystallization, Solidification or Separation) | Pass | — | D - 3458 |
| Specific Gravity (60°F) | 0.85 | — | ASTM - 287 |
Regulatory & Compliance
- Quality Standards