Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application
SL-10924 is used in application where an NLGI grade 2 is required. It is formulated specifically for Army Vehicles, Artillery and Ground Equipment. This unique grease can also be used for Automotive and Industrial Applications.
Properties
- NLGI Grade
- Typical Properties
Value | Units | Test Method / Conditions | |
Operating Range | - 54 - 180 | °C | — |
Worked Penetration | 271.0 | — | ASTM D - 217 |
Evaporated Loss (TGA, 180°C, 1hr Wt) | 4.9 | % | ASTM E1131 |
Oil Separation | max. 2.92 | % | ASTM D - 6184 |
Dropping Point | min. 308 | °C | ASTM D - 2265 |
Extreme Pressure Properties | 41.51 | kgf | ASTM D - 2596 |
Last Non - Seizure Load (Scar, 0.40 mm) | 80.0 | kg | ASTM D - 2596 |
Last Seizure Load (Scar, 2.85 mm) | 250.0 | kg | — |
Weld Load | 315 kg | — | — |
Wear Scar Diameter | 0.39 | mm | ASTM D - 2266 |
Thickener Type | Lithium Complex | — | — |
Salt Water Corrosion Resistance (1% NaCl) | Pass (all bearing no corrosion) | — | ASTM D - 5969* |
Oxidation Stability (PDSC at 210°C) | min. 34.5 | minutes | ASTM D - 5483 |
Copper Corrosion | 1b (shiny) | — | ASTM D - 4048 |
Roll Stability | 271/303 | — | ASTM D - 1831 |
Water Stability | 10.0 | — | ASTM D - 217* |
Worked Stability | 39.0 | — | ASTM D217* |
Low Temperature Torque (- 65°F, Breakway Torque) | 2.91 | N.m | — |
Low Temperature Torque (- 65°F, Running Torque at 5 minute) | 1.8 | N.m | — |
Life Performance (4 runs, 160°C, 1000 rpm) | Over 175 | hours | ASTM D - 3527 |
Workmanship | Pass | — | — |
Elastomer Compatibility CR (Volume) | 36.2 | — | ASTM D - 4289 |
Elastomer Compatibility (CR, Hardness) | -15.0 | — | — |
Elastomer Compatibility (NBR - L, Volume) | 25.95 | — | — |
Elastomer Compatibility (NBR - L, Hardness) | -15.0 | — | — |
Biodegradability | min. 62.92 | % | ASTM D - 5864, D - 6541, or D - 7373 |
Regulatory & Compliance
- Quality Standards
- Approvals
SL-10924 is approved under Military Specification MIL-PRF-10924H Amd. 2.