Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
Active Ingredients triclopyr: 3,5,6-trichloro-2-pyridinyloxyacetic acid, triethylamine salt. 4.0% 2,4 dichlorophenoxyacetic acid, dimethylamine salt 14.0% Other Ingredients 82.0% TOTAL 100.0% Acid equivalence (a.e.): 14.4%
Features & Benefits
- Labeling Claims
- Benefits
- Targeted herbicide delivery
- Enhanced broadleaf aquatic weed control
- Short exposure time required
- Selective and systemic herbicide
- No swimming restrictions
- First combination formulation in aquatics
- Formulated on biodegradable granules
- Supported by FasTEST® Water Analysis technology
Applications & Uses
- Markets
- Applications
- Application Technique
- Herbicide Target Species
- Directions for Use
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying
Renovate MAX G herbicide may be applied directly to water for the control of aquatic weeds. Renovate MAX G enhances target weed control, and provides selective control of many broadleaf weeds in: ponds; lakes, reservoirs, marshes; bayous: drainage ditches, non-irrigation canals, and rivers and streams that are quiescent or slow-flowing
Renovate MAX G is formulated on biodegradable granules that, when applied to water bodies, immediately deliver Renovate MAX G down to the critical area for controlling target weeds. Renovate MAX G is quickly absorbed from the water through plant stems and foliage and from the hydrosoil by roots. Herbicidal symptoms are initially expressed 2 to 14 days following application and usually involve bending and twisting of apical sections and shoots of susceptible plants. Initial symptoms are followed by necrosis of terminal buds and above ground tissue. Generally, target plants are controlled within 2 to 4 weeks after treatment, but depending on conditions and plant species can take up to 8 weeks for complete control.
When applying Renovate MAX G follow all applicable use directions, precautions and limitations. All Renovate MAX G concentrations referred to in this label are based on acid equivalence (a.e.).
Obtain Required Permits: Consult with appropriate state or local pesticide and/or water authorities before applying this product in or around pubic waters. Permits and posting or treatment notification may be required by state or local public agencies. Recreational Use of Water in Treatment Area: There are no restrictions on the use of treated water for recreational purposes, including swimming, fishing and domestic purposes. settled.
Livestock Use of Water from Treatment Area: There are no restrictions on consumption of treated water for potable use by livestock, pets, or other animals.
USE RESTRICTIONS
- Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application
- Do not enter or allow people (or pets) to enter the treated area until dusts have settled
- For requirements specific to your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation.
- Chemigation: Do not apply Renovate MAX G through any type of irrigation system.
- Do not apply to tidal salt water bays or estuaries.
- Applications to target areas are limited to two (2) per season.
- Apply a maximum of 93.7 pounds of Renovate MAX G (13.5 lbs a.e.Yacre-foot per application. Do not exceed 5.0 ppm during any single application
- Do not apply within 21 days of previous application except when conducting split treatments. Split treatments, over relatively short periods of time (e.g., 1 to 4 days), may be effective in some areas to maintain adequate exposure with target plants, such as small sites or sites with higher dilution potential.
- When treating moving bodies of water, applications must be made while traveling upstream to prevent concentration of herbicide downstream from the application.
Properties
Safety & Health
- Precautionary Statements
HAZARD TO HUMANS AND DOMESTIC ANIMALS
Causes substantial, but temporary eye injury. Harmful if swallowed. Avoid contact with skin or clothing. Do not get in eyes or on clothing.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
All loaders, applicators, and other handlers must wear
- Long-sleeve shirt and long pants
- Shoes and socks
- Protective eyewear
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
USER SAFETY RECOMMENDATIONS
Users should:
- Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. If pesticide gets on skin, wash immediately with soap and water
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
ENGINEERING CONTROLS
Pilots must use an enclosed cockpit that meets the requirements listed in the WPS for agricultural pesticides [40 CFR 170.240(d)(6].
ENVIRONMENTAL HAZARDS
Fish breathe dissolved oxygen in the water and decaying weeds also use oxygen. When treating continuous, dense weed masses, it may be appropriate to treat only part of the infestation at a time. For example, in quiescent waters, apply the product to areas separated by untreated sections that can be treated after vegetation in treated areas has disintegrated. During the growing season, weeds decompose in a 2 to 4 week period following treatment. Begin treatment along the shore and proceed outwards in bands to allow fish to move into untreated areas. Waters having limited and less dense weed infestations may not require partial treatments.
SPECIALITY CHEMICAL: Do not ship or store with food, feeds, drugs or clothing.
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage And Disposal
Do not contaminate water, food or feed by storage or disposal.
Pesticide Storage: Store in original container only. Do not store near feed or foodstuffs. In case of spill, contain material and dispose as waste.
Pesticide Disposal: Wastes resulting from use of this product must be used according to label directions or disposed of at an approved waste disposal facility.
Nonrefillable Container Handling (non-rigid, any size): Do not reuse or refill this container. Completely empty bag into application equipment. Offer for recycling if available. If recycling is not available, then dispose of empty bag in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
Nonrefillable Container Handling (rigid, 50 lbs or less): Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Empty the remaining contents into application equipment or a mix tank. Triple rinse as follows: Fill the container 44 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after flow begins to drip. Repeat this procedure two more times. Then offer for recycling (if available) or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by State and Local authorities, by burning. If burned, stay out of smoke.