company tower banner
Sharda USA Company Logo

Bi-Dash Specialty

1 of 2 products in this brand
Bi-Dash Specialty Controls listed insect pests and mites indoors and in interiorscapes; outdoors on non-commercial ornamentals and lawns in landscaped areas around residential, institutional, public, commercial, and industrial buildings, parks, recreational areas, and athletic fields.

Functions: Insecticide

Insecticide Target Species: Ants, Aphids, Armyworms, Beetles, Billbugs, Borers, Chinch Bugs, Crickets, Cutworms, Fall Webworms, Fungus Gnats, Grasshoppers, Japanese Beeltes, Leaf Miners, Leafhoppers, Meal Worms, Mealybugs, Mites, Thrips, Weevils, Whiteflies

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Agrochemical Functions
Technologies
Active Ingredients
Active Ingredients % By Weight
Bifenthrin 7.9%
OTHER INGREDIENTS 92.1%
TOTAL 100.0%

Contains 2/3 pound active ingredient per gallon. *Cis isomers 97% minimum, trans isomers 3% maximum.  

Features & Benefits

Product Info

Prevents and controls termites, carpenter ants, and other pests of structures in and around homes, commercial and industrial buildings, recreational areas, athletic fields, lawns and ornamentals, and livestock/poultry houses. For use as a termiticide: May only be used by individuals/firms licensed by the State to apply termiticide products. States may have more restrictive requirements regarding qualifications of persons using this product. Consult the pest control regulatory agency of your State prior to using this product.

Applications & Uses

Direction For Use

It is a violation of Federal law to use this product in a manner inconsistent with its labeling

Nonagricultural Use Requirements

The requirements in this box only apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms and forests. Do not allow children or pets to enter treated areas until sprays have dried.

Application Instructions

Bi-Dash Specialty can be applied with low-volume application equipment, including Actisol® and Micro-Injector® for surface, spot, crack and crevice, and deep harborage treatments.
Bi-Dash Specialty can be applied on plants intended only for esthetic purposes or climatic modifications and being grown in interior plantscapes, ornamental gardens or parks, or lawns and grounds.
Bi-Dash Specialty controls a wide range of listed pests on flowers, foliage plants, non-bearing fruit and nut trees, shrubs, and ornamental trees, in interior and exterior plantscapes, such as those in hotels, office buildings, shopping malls, and around athletic fields, homes, institutional buildings, parks, and recreational areas. Non-bearing fruit and nut trees are those that will not produce a harvestable crop during the season of application.
Bi-Dash Specialty prevents and controls termite infestations in and around structures and building construction. To institute a barrier between the wood and the termites in the soil, the chemical emulsion must be effectively dispersed in the soil. It is important to remove unnecessary materials that contain cellulose and wood from around foundatio

Properties

Physical Form

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Precautionary Statement

HAZARDS TO HUMANS AND DOMESTIC ANIMALS

CAUTION

Harmful if swallowed, inhaled or absorbed through skin. Causes moderate eye irritation. Avoid breathing vapor or spray mist. Avoid contact with skin, eyes,
or clothing.
PERSONAL PROTECTION EQUIPMENT (PPE)
Pesticide handlers (mixers, loaders, and applicators) must wear:
• long sleeved shirt and long pants
• shoes and socks
• chemical-resistant gloves such as barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, polyvinyl chloride, and viton
After the product is diluted in accordance with label directions for use, and/or when mixing/loading using a closed spray tank transfer system, or an in-line injector system, shirt, pants, socks, shoes, and waterproof gloves are sufficient.
All pesticide handlers must wear protective eyewear when working in non-ventilated space or when applying termiticide by rodding or sub-slab injection.
When working in a non-ventilated space, all pesticide handlers must wear a NIOSH approved:
• Half face respirator (TC-84A) with organic vapor cartridges and R or P combination filters;
• Full face respirator (TC-84A) with organic vapor cartridges and any R or P combination filters;
• Gas mask (TC-14G) with an Organic Vapor Canister and HE Filter; or
• Powered air purifying respirator (TC-23C) with an organic vapor cartridge and HE filter.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash
PPE separately from other laundry.

USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and
change into clean clothing.
ENVIRONMENTAL HAZARDS
This pesticide is extremely toxic to fish and aquatic invertebrates. Do not allow this product to enter or run off into storm drains, drainage ditches, or gutters. Apply this product in calm weather when rain is not predicted for 24 hours to ensure that wind or rain does not blow or wash pesticide off of the treatment area. Rinse application equipment over treated areas to avoid runoff to water bodies or drainage systems. Do not spray fish and/or reptile pets in/around ornamental ponds.
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and run-off from treated areas may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water when disposing of equipment washwaters. Care should be used when spraying to avoid fish and reptile pets in/around ornamental ponds.
Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other public waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage plant authority. For guidance contact your State Water Board or Regional Office of the EPA.
This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops if bees are foraging the treatment area.
PHYSICAL AND CHEMICAL HAZARDS
Do not apply water-based dilutions of Bi-Dash Specialty to electrical conduits, motor housings, junction boxes, switch boxes, or other electrical equipment because of possible shock hazard. Do not mix or allow coming in contact with oxidizing agent. Hazardous chemical reaction may occur.

Storage & Handling

Storage And Disposal

DO NOT contaminate water, food, or feed, by storage or disposal.
PESTICIDE STORAGE: Keep out of reach of children and animals. Store in original containers only. Store in a cool, dry place and avoid excess heat. Carefully open containers. After partial use, replace lids and close tightly. Do not put concentrate or dilute material into food or drink container.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Do not contaminate water, food, or feed by storage or disposal. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. Dispose of excess or waste pesticide by use according to label directions, or contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. In Case of Spill: Avoid contact, isolate area, and keep out animals and unprotected persons. Confine spills. To Confine Spill: If liquid, dike surrounding area or absorb with sand, cat litter, or commercial clay. If dry material, cover to prevent dispersal. Place damaged package in a holding container. Identify contents. In the event of a major spill call 1-800-424-9300 (CHEMTREC).
CONTAINER HANDLING:
[NON-REFILLABLE CONTAINERS] Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after
emptying.
(Non-refillable container less than or equal to 5 gallons): Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
(Non-refillable container greater than 5 gallons): Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
[REFILLABLE CONTAINERS]
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.