Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- CAS No.
- 60207-90-1
- Technologies
- Product Families
- Active Ingredients
Active Ingredients %By Weight Propiconazole* . 41.8% Other Ingredients 58.2% Total 100.0%
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Fungicide Target Species
- Direction For Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the Agency responsible for pesticide regulation
- Agricultural Use Requirements
Use this product in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. Exception: If the product is soil injected or soil incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water is:
- Coveralls
- Chemical-resistant gloves such as barrier laminate or Viton
- Shoes plus socks
- Protective eyewear
- Uses
Superior broad spectrum control of major foliar fungal diseases and is labeled for use in agricultural applications. Economical. Excellent return on investment. Systemic activity. Rainfast once dry.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statement
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
WARNING
Causes substantial, but temporary eye injury. Do not get in eyes or on clothing. Wear protective eyewear. Avoid contact with skin. Harmful if swallowed.
Causes skin irritation. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
Remove and wash contaminated clothing before reuse. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for Category G on EPA chemicalresistance category selection chart.
All handlers must wear:
• Protective eyewear (goggles, face shield, or safety glasses) In addition, all handlers (mixers, loaders, and applicators, or individuals performing one or more of these tasks), who are applying this pesticide using hand-held equipment must wear:
• Long-sleeved shirt and long pants
• Shoes and socks
• Chemical-resistant gloves such as barrier laminate or Viton
• Protective eyewear (goggles, face shield, or safety glasses)
All handlers using propiconazole as a seed piece treatment must wear:
• Chemical-resistant gloves such as barrier laminate or Viton
• Chemical-resistant apron
• Protective eyewear (goggles, face shield, or safety glasses)
USER SAFETY REQUIREMENTS
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them.
ENGINEERING CONTROLS STATEMENT
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
This product is toxic to fish and shrimp. Do not apply directly to water, or to areas where surface water is present, or to inter-tidal areas below mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment washwater or rinsate.
PHYSICAL OR CHEMICAL HAZARDS
Do not use, pour, spill, or store near heat or open flame
Packaging & Availability
- Packaging
1 x 2.5 gallon (180 gal / pallet) 1 x 2.5 gallon (180 gal / pallet)
Storage & Handling
- Storage And Disposal
Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: Store in original container only.
PESTICIDE DISPOSAL: Pesticide wastes may be acutely hazardous. Improper disposal is a violation of federal law. Pesticide, mixtures, or equipment rinse water that cannot be chemically reprocessed must be disposed of according to applicable federal, state or local regulations. Contact your State Pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA Regional office for guidance.
CONTAINER DISPOSAL: Nonrefillable Container. Do not reuse or refill this container. Triple rinse container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling, if available, or dispose of in a sanitary landfill, or by other state and local approved procedures