company tower banner
Silicone Solutions Company Logo

Silicone Solutions SS-1004

Silicone Solutions SS-1004 is a high performance thermally conductive liquid gap filling material. It is formulated to develop a very soft, form in place elastomer ideal for coupling hot PC board components to heat sinks. It is supplied as a two part, 1:1 mix ratio silicone that when mixed, cures at room temperature, or when exposed to heat results in a cured elastomer in 5 minutes.

Product Type: 2K (2 component) Adhesive

Cure Method: Air Dry, Chemical Cure

Chemical Family: Silicon-based Compounds

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Cure System

Platinum catalyzed

Features & Benefits

Product Features
  • No odor or byproducts
  • 100% solids liquid
  • 1.0 W/m-K thermal conductivity
  • Convenient 1:1 mix ratio
Limitations

Allow to fully cure before putting assembly into service. Ensure enough product remains between flanges to be effective in an assembly.

Applications & Uses

Typical Applications
  • Electronic component thermal dissipation
  • Coupling electronic components
  • Form in place heat sink

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Viscosity50000cps
Specific Gravity2.4
ConsistencyPaste
Pot life at RT10.0Minutes
Cured (at RT)60.0Minutes
Cure Time (150°C)5.0Minutes
Durometer30.0Shore A
Dielectric Strength500 volts/mil
Dielectric Constant 100 Hz7.0
Volume Resistivity1012.0Ohms/M
Thermal Conductivity1.0W/m-K

Technical Details & Test Data

Adhesion

Primerless adhesion to most metals and typical substrates.

Safety & Health

Handling and Safety

This is a platinum cure system product. The catalyst can be deactivated by exposure to sulfur containing compounds like thiols, sulfides, sulfates, organic rubber contaning sulfur, nitrogen containing compounds like amines, amides, imides, azides, tin metals or compounds, or tin cured RTV

For maximum shelf life, keep containers sealed when not in use. Keep out of the reach of children. Uncured sealant irritates eyes and skin. Refer to the SDS.

Packaging & Availability

Packaging Type

Storage & Handling

Shelf Life

Sealed containers are guaranteed for 12 months from the ship date when stored in a cool dry area below 70°F.