Products

AP1549 is Halogen Free masterbatch developed by Silma for PP application, suitable for injection molding and extrusion to obtain Class V2 – UL94 or Class B1 – DIN 4102. Excellent glow wire even at low thickness is suitable for Electrical application.

Silma AP1476 is highly concentrated bromine based and sinergystic masterbatch, on polypropylene (PP) carrier.Suitable for PP fibers, films, injection molding of the chers and items in outside employs. It's, able to comply with V2 - UL94 and italian CLASS 1.

Silma AE1153 is highly concentrated brominated and sinergystic masterbatch suitable for poliolefine, able to comply class V0 - UL94 with 1,6 mm tickenss. Is suitable for extrusion, injection molded process, but also for higher 20 micron film tickness.

AP1305 is Masterbatch process aids for mineral filled compounds not containing MAH-grafted coupling agents. Improve surface quality, reduce viscosityand stick to the metal of extruder, remove of die-built-up, increase fillers dispersion and output stability.

AL1313 is Highly filled masterbatch of antiblocking agent for blow and cast film till 15 micron. Helps the tubular opening, reduces the sticking, improve welding,give stability output of the extruder. The use together with other additives is possible without problems.

AL1339 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine and to prevent oxidation on the machine stop.

AL1217 is Masterbatch containing process aids for polyolefins, is a compatibilizer, improve the surface smoothness (reduce the aesthetical defects of the items), reduce the wear equipments. Able to reduce the viscosity and the energy comsumption during compounding and processing.

AL1469 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine and to prevent oxidation on the machine stop.

Silma AP1731 is Halogen Free masterbatch for Polypropilene 30% talc or calcium carbonate to comply UL94 Class V0. It’s according to Regulation IEC61249-2-21 until 35%, Antimony free, could be used in extrusion or injection molding.

AL1142A is Highly viscosity polydimethilsiloxane process aids for compound of mineral flame retardant filler. Improve surface quality, reduce viscosity, remove of die-built-up, reduce mineral filler stick to the metal of extruder, increase fillers dispersion and output stability.

AE1046A is Used in the film, in the extrusion of compounds and in the processing of regenerated products in general, it favors the elimination of air or gas bubbles due to the presence of humidity or foreign liquids in the material used, improving its appearance and workability.

Silma AF1030 is a masterbatch containing antistatic agents suitable for films, injection molding and extrusion LDPE-LLDPE. This a masterbatch prevents build-up of eventual electrostatic charges, but it produce a lubricant action on films used on fast-running automatic packaging machines. Its action will explicate at over 50% relative air humidity. Preliminary tests are advisable in printing and weldability.

AL1508 is Masterbatch containing specially agent suitable for film, also coextruded, where the wrinkles and other surface defects, damagent the perfect adhesion of the layers. The masterbatch is able to keep cleaned the extruder machine.

Silma AF1093A is highly filled masterbatch of transparent antiblocking agent for film belove of 100 micron and injection molding. Helps the opening blow film, reduces the sticking, improve welding, give stability output of the extruder. Not problem with corona treatment.