Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Application
IC tray,electic/electronic products
Properties
- Flame Rating
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.07 | - | ASTM D792 |
| Molding Shrinkage(Flow) (3.2mm) | 0.4 ~ 0.7 | % | ASTM D955 |
| Melt Flow Rate (220°C/10kg) | 30.0 | g/10min | ASTM D1238 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield (3.2mm) (50mm/min) | 440.0 | kg/cm2 | ASTM D638 |
| Tensile Elongation at Break (3.2mm) (50mm/min) | min. 5 | % | ASTM D638 |
| Tensile Elongation at Break (3.2mm) (50mm/min) | min. 10 | % | ASTM D638 |
| Tensile Modulus (3.2mm) (1mm/min) | 16900.0 | kg/cm2 | ASTM D638 |
| Flexural Modulus (6.4mm) (15mm/min) | 710.0 | kg/cm2 | ASTM D790 |
| Flexural Modulus (6.4mm) (15mm/min) | 22000.0 | kg/cm2 | ASTM D790 |
| IZOD Impact Strength (3.2mm) (Notched) (23°C) | 50 | kg.cm/cm | ASTM D256 |
| Rockwell Hardness (R-Scale) | 98.0 | - | ASTM D785 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (6.4mm) (Unannealed) (18.6kg - 4.6 kg) | 87 - 90 | °C | ASTM D648 |
| Vicat Softening Temperature (5kg .50°C/h) | 94.0 | °C | ASTM D1525 |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking lndex(CTI) (Solution A) | 0.0 | Volts | IEC60112 |
| Value | Units | Test Method / Conditions | |
| Relative Temperature Index Electrical | 60.0 | °C | UL746B |
| Relative Temperature Index Mechanical with lmpact | 60.0 | °C | UL746B |
| Relative Temperature Index Mechanical without lmpact | 60.0 | °C | UL746B |
| Surface Resistivity (23°C) | 1000000000000.0 | Ohm | ASTM D257 |
| Arc Resistance (23°C) | 5.0 | Ohm.m | ASTM D495 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 70 ~ 80 | °C | - |
| Drying Time | 2 ~ 4 | hrs | - |
| Moisture Content | min. 0.01 | % | - |
| Melt Temperature | 210 ~ 240 | °C | - |
| Cylinder Temperature Rear | 170 ~ 190 | °C | - |
| Cylinder Temperature Middle | 180 ~ 200 | °C | - |
| Cylinder Temperature Front | 190 ~ 210 | °C | - |
| Nozzle Temperature | 200 ~ 230 | °C | - |
| Mold Tempeature | 40 ~ 70 | °C | - |
| Back Pressure | 300 ~ 600 | kg/cm2 | - |
| Screw Speed | 30 ~ 60 | rpm | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability